Best Value Available! 2026 Realistic Verified Free 300-710 Exam Questions
Pass Your Exam Easily! 300-710 Real Question Answers Updated
Exam Content
The content of the Cisco 300-710 test revolves around four domains, each containing specific knowledge and skills that the candidates must develop competency in. These areas have different percentage weights in the exam syllabus, which shows how many questions related to this or that topic will appear in the test. While preparing for your certification exam, you need to pay special attention to the sections with higher weight. However, you need to remember that only mastering all the topics will guarantee success in your test. The detailed outline of the domains covered in Cisco 300-710 is provided below.
- Deployment – 30%
Within this first topic, the examinees need to demonstrate that they have the relevant skills in implementing NGFW modes (including routed mode as well as transparent mode); implementing NGIPS modes (including passive & inline); implementing high availability options (including link redundancy, standby/active failover, multi-instance); describing IRB configurations.
- Configuration – 30%
This domain requires that the students have the expertise in a wide range of knowledge areas. For starters, they should have proficiency in configuring system settings within Cisco Firepower Management Center as well as configuring the policies, such as access control, malware & file, intrusion, identity, SSL, DNS, prefilter within Cisco Firepower Management Center. In addition, they need to able to customize the following features with the help of Cisco Firepower Management Center: network discovery, correlation, application detectors (Open AppID), and actions. This part also encompasses such skills as customizing objects with the help of Firepower Management Center (including object management as well as intrusion rules) and customizing devices with the help of Firepower Management Center (including device Management, VPN, NAT, QoS, Certificates, Platform Settings).
- Management & Troubleshooting – 25%
To tackle the questions associated with this subject area, the test takers should develop their competency in performing troubleshooting with the help of FMC CLI as well as GUI; customizing dashboards as well as reporting in FMC; troubleshooting with the help of packet capture actions; analyzing standard reports and risk.
- Integration – 15%
The last section in the Cisco 300-710 exam encompasses the individuals’ skills, such as customizing Cisco AMP for Networks within Firepower Management Center; configuring Cisco AMP for Endpoints within Firepower Management Center; implementing Threat Intelligence Director for third-party security intelligence feeds. Moreover, the learners should possess the expertise in describing the utilization of Cisco Threat Response for the needs of security investigations; describing Cisco FMC PxGrid Integration using Cisco Identify Services Engine (ISE); describing the functionality of Rapid Threat Containment (RTC) within Firepower Management Center.
NEW QUESTION # 165
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 166
Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)
- A. Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
- B. Bridge groups are supported only in transparent firewall mode.
- C. The BVI IP address must be in a separate subnet from the connected network.
- D. Bridge groups are supported in both transparent and routed firewall modes.
- E. Each directly connected network must be on the same subnet.
Answer: D,E
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION # 167
A consultant Is working on a project where the customer is upgrading from a single Cisco Firepower 2130 managed by FDM to a pair of Cisco Firepower 2130s managed oy FMC tor nigh availability. The customer wants the configures of the existing device being managed by FDM to be carried over to FMC and then replicated to the additional: device being added to create the high availability pair. Which action must the consultant take to meet this requirement?
- A. The current FDM configuration will be converted automatically into FMC when the device registers.
- B. The current FDM configuration must be configured by hand into FMC before the devices are registered.
- C. The FTD configuration must be converted to ASA command format, which can then be migrated to FMC.
- D. The current FDM configuration must be migrated to FMC using the Secure Firewall Migration Tool.
Answer: A
Explanation:
When an FTD device that is managed by FDM is registered to FMC, the existing configuration is automatically converted and imported into FMC. The FMC then pushes the configuration back to the device.
This process preserves most of the FDM configuration, except for some features that are not supported by FMC, such as VPN wizards and certificates.
NEW QUESTION # 168
Which firewall design will allow It to forward traffic at layers 2 and 3 for the same subnet?
- A. Cisco Firepower Threat Defense mode
- B. transparent mode
- C. routed mode
- D. Integrated routing and bridging
Answer: B
Explanation:
Transparent mode is a firewall configuration in which the firewall acts as a "bump in the wire" or a "stealth firewall" and is not seen as a router hop to connected devices. In transparent mode, the firewall can forward traffic at both layer 2 and layer 3 for the same subnet, as it does not perform any address translation or routing.
The firewall inspects the traffic and applies security policies based on the source and destination IP addresses, ports, and protocols. Transparent mode is useful when you want to deploy a firewall without changing the existing network topology or addressing scheme1.
NEW QUESTION # 169
Which action should be taken after editing an object that is used inside an access control policy?
- A. Create another rule using a different object name.
- B. Delete the existing object in use.
- C. Redeploy the updated configuration.
- D. Refresh the Cisco FMC GUI for the access control policy.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config- guide-v63/reusable_objects.html
NEW QUESTION # 170
A network administrator cannot select the link to be used for failover when configuring an active/passive HA Cisco FTD pair. Which configuration must be changed before setting up the high availability pair?
- A. The interface must be configured as part of a LACP Active/Active EtherChannel.
- B. The name Failover must be configured manually on the interface on each Cisco FTD.
- C. The interface name must be removed from the interface on each Cisco FTD.
- D. An IP address in the same subnet must be added to each Cisco FTD on the interface.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/firepower-management-center/212699-configure-ftd-high-availability-on-firep.html
NEW QUESTION # 171
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION # 172
An engineer is building a new access control policy using Cisco FMC. The policy must inspect a unique IPS policy as well as log rule matching. Which action must be taken to meet these requirements?
- A. Configure an IPS policy and enable per-rule logging.
- B. Disable the default IPS policy and enable per-rule logging.
- C. Disable the default IPS policy and enable global logging.
- D. Configure an IPS policy and enable global logging.
Answer: D
NEW QUESTION # 173
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?
- A. subinterface
- B. bridge group member
- C. switch virtual
- D. bridge virtual
Answer: D
Explanation:
Reference:https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config- guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION # 174
A network engineer implements a new Cisco Firepower device on the network to take advantage of its intrusion detection functionality. There is a requirement to analyze the traffic going across the device, alert on any malicious traffic, and appear as a bump in the wire How should this be implemented?
- A. Configure a bridge group in transparent mode.
- B. Add an IP address to the physical Cisco Firepower interfaces.
- C. Enable routing on the Cisco Firepower
- D. Specify the BVl IP address as the default gateway for connected devices.
Answer: B
NEW QUESTION # 175
What is a behavior of a Cisco FMC database purge?
- A. The appropriate process is restarted.
- B. User login and history data are removed from the database if the User Activity check box is selected.
- C. Data can be recovered from the device.
- D. The specified data is removed from Cisco FMC and kept for two weeks.
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/management_center_database_purge.pdf
NEW QUESTION # 176
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
- A. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
- B. reputation-based objects, such as URL categories
- C. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country
- D. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country
- E. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists
Answer: C,E
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/reusable_objects.html#ID-2243-00000414
NEW QUESTION # 177 
Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying the pokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?
- A. The action of the rule is set to trust instead of allow.
- B. The rule must define the source network for inspection as well as the port
- C. The rule must specify the security zone that originates the traffic
- D. The rule is configured with the wrong setting for the source port
Answer: A
NEW QUESTION # 178
Drag and drop the configuration steps from the left into the sequence on the right to enable external authentication on Cisco FMC to a RADIUS server.
Answer:
Explanation:
Explanation:
4, 1, 2, 3
NEW QUESTION # 179
An administrator must fix a network problem whereby traffic from the inside network to a webserver is not getting through an instance of Cisco Secure Firewall Threat Defense. Which command must the administrator use to capture packets to the webserver that are dropped by Secure Firewall Throat Defense and resold the issue?
- A. capture CAP int INSIDE match tcp any 80 host WEBSERVERlP 80
- B. capture CAP int OUTSIDE match ip any host WEBSERVERIP
- C. capture CAP int INSIDE match ip any host WEBSERVERIP
- D. capture CAP type asp-drop all headers-only
Answer: D
Explanation:
To capture packets that are dropped by Cisco Secure Firewall Threat Defense (FTD) and troubleshoot the issue of traffic from the inside network to a webserver not getting through, the administrator should use the command to capture packets dropped by the accelerated security path (ASP) engine. The correct command is:
capture CAP type asp-drop all headers-only
This command captures all packets dropped by the ASP engine, which includes packets that are being blocked by access control policies, NAT issues, or other security checks.
Steps:
* Access the FTD CLI.
* Run the command capture CAP type asp-drop all headers-only to capture dropped packets.
* Analyze the captured data to identify the cause of the drops.
This command provides detailed information on why packets are being dropped, helping the administrator resolve the issue.
References: Cisco Secure Firewall Threat Defense Configuration Guide, Chapter on Packet Capture and ASP Drop Captures.
NEW QUESTION # 180
What are the minimum requirements to deploy a managed device inline?
- A. passive interface, security zone, MTU, and mode
- B. passive interface, MTU, and mode
- C. inline interfaces, security zones, MTU, and mode
- D. inline interfaces, MTU, and mode
Answer: D
Explanation:
Section: Deployment
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/650/configuration/guide/fpmc-config- guide-v65/ips_device_deployments_and_configuration.html
NEW QUESTION # 181
An administrator is configuring their transparent Cisco FTD device to receive ERSPAN traffic from multiple switches on a passive port, but the Cisco FTD is not processing the traffic. What is the problem?
- A. The switches do not have Layer 3 connectivity to the FTD device for GRE traffic transmission.
- B. The Cisco FTD must be in routed mode to process ERSPAN traffic.
- C. The Cisco FTD must be configured with an ERSPAN port not a passive port.
- D. The switches were not set up with a monitor session ID that matches the flow ID defined on the Cisco FTD.
Answer: B
NEW QUESTION # 182
A network engineer detects a connectivity issue between Cisco Secure Firewall Management Centre and Cisco Secure Firewall Threat Defense Initial troubleshooting indicates that heartbeats and events not being received. The engineer re-establishes the secure channels between both peers Which two commands must the engineer run to resolve the issue? (Choose two.)
- A. show history
- B. manage_procs.pl
- C. sudo perfstats -Cq < /var/sf/rna/correlator-stats/now
- D. show disk-manager
- E. sudo stats_unified.pl
Answer: B,E
Explanation:
When connectivity issues are detected between Cisco Secure Firewall Management Center (FMC) and Cisco Secure Firewall Threat Defense (FTD) devices, and initial troubleshooting indicates that heartbeats and events are not being received, the engineer can run the following commands to resolve the issue by re-establishing secure channels and checking process statuses:
* manage_procs.pl:This script is used to manage and restart processes on the FTD device. Running this script can help restart any malfunctioning processes and re-establish connectivity between the FMC and FTD.
* sudo stats_unified.pl:This command provides detailed statistics and status of the unified system processes. It helps in diagnosing and resolving issues related to the secure channel and event reporting.
Steps:
* Access the FTD CLI.
* Run the commandmanage_procs.plto restart processes.
* Run the commandsudo stats_unified.plto gather detailed process statistics and verify the status.
These commands help resolve connectivity issues by ensuring that all necessary processes are running correctly and secure channels are re-established.
References:Cisco Secure Firewall Threat Defense Configuration Guide, Chapter on Troubleshooting and CLI Commands.
NEW QUESTION # 183
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
- A. The units must be different models if they are part of the same series.
- B. The units must be configured only for firewall routed mode.
- C. The units must be the same model.
- D. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
- E. The units must be the same version
Answer: C,E
NEW QUESTION # 184
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. Cisco Firepower automatically updates the policies.
- B. The administrator manually updates the policies.
Ref: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailoring_Intrusion_Protection_to_Your_Network_Assets.html - C. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- D. Cisco Firepower gives recommendations to update the policies.
Answer: D
NEW QUESTION # 185
What is the result a specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an interface?
- A. Matching traffic is not rate limited.
- B. The system rate-limits all traffic.
- C. The system repeatedly generates warnings.
- D. The rate-limiting rule is disabled.
Answer: A
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/quality_of_service_qos.pdf
NEW QUESTION # 186
A Cisco FTD has two physical interfaces assigned to a BVI. Each interface is connected to a different VLAN on the same switch.
Which firewall mode is the Cisco FTD set up to support?
- A. transparent
- B. routed
- C. high availability clustering
- D. active/active failover
Answer: B
NEW QUESTION # 187
With Cisco FirePOWER Threat Defense software, which interface mode do you configure for an IPS deployment, where traffic passes through the appliance but does not require VLAN rewriting?
- A. transparent
- B. routed
- C. inline tap
- D. passive
- E. inline set
Answer: B
NEW QUESTION # 188
What is a valid Cisco AMP file disposition?
- A. malware
- B. non-malicious
- C. pristine
- D. known-good
Answer: A
NEW QUESTION # 189
An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs Each DMZ has a unique private IP subnet range. How is this requirement satisfied?
- A. Deploy the firewall in routed mode with NAT configured.
- B. Deploy the firewall in transparent mode with NAT configured.
- C. Deploy the firewall in transparent mode with access control policies.
- D. Deploy the firewall in routed mode with access control policies.
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/general/asa-96-general-config/intro-fw.h
NEW QUESTION # 190
......
Cisco 300-710 certification exam is an intermediate-level exam that focuses on securing networks with Cisco Firepower. 300-710 exam is designed to test a candidate's knowledge and skills related to implementing and managing advanced security features on Cisco Firepower and Firepower Threat Defense platforms. 300-710 exam covers a wide range of topics, including firewall configuration, intrusion prevention, network access control, and advanced malware protection.
Actual Questions Answers Pass With Real 300-710 Exam Dumps: https://www.free4dump.com/300-710-braindumps-torrent.html
300-710 Dumps Prepare Your Exam With 445 Questions: https://drive.google.com/open?id=1YyKBbho_zHwfQU10tEiQfdZhgBclHQ2s