Updated PDF (New 2026) Actual Workday Workday-Pro-HCM-Reporting Exam Questions
Verified Workday-Pro-HCM-Reporting Exam Dumps PDF [2026] Access using Free4Dump
Workday Workday-Pro-HCM-Reporting Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 10
How can you view the latest content housed in WDSetup?
- A. Sign in to the Shared WDSetup tenant through the Workday Community.
- B. Access your Customer Central tenant.
- C. Run the What's New report in your Workday tenant.
- D. Migrate the content from WDSetup into a Sandbox tenant using Object Transporter (OX).
Answer: A
Explanation:
Workday maintains a shared WDSetup tenant where customers can access the latest delivered content, including reports, dashboards, and calculated field templates. Customers must log in through the Workday Community portal to access this tenant.
From the Workday binder: "The WDSetup tenant provides shared configuration content maintained by Workday. Customers can access the tenant through Workday Community to review the latest delivered reports and dashboards." The other options are incorrect: Object Transporter (OX) migrates content between customer tenants, not WDSetup. Customer Central is a separate tenant for learning, not for content review. The "What's New" report shows system updates, not the latest WDSetup content.
Therefore, the correct answer is C. Sign in to the Shared WDSetup tenant through the Workday Community.
NEW QUESTION # 11
You transferred ownership of your report to an HR Analyst. Then, you run the Custom Report Exception Audit report, and a critical error appears next to the report you just transferred.
Why could this be?
- A. The HR Analyst is not in the same location as you are.
- B. The HR Analyst does not have access to all of the fields on the report.
- C. The report has prompts.
- D. The report is not shared with anyone.
Answer: B
Explanation:
When ownership of a custom report is transferred in Workday, the system immediately evaluates whether the new report owner has full security access to all components of the report. This includes access to the data source, all report fields, calculated fields, and any secured domains referenced by the report. If the new owner lacks access to even one secured field or domain, the report becomes invalid for that owner.
The Custom Report Exception Audit report is specifically designed to identify these types of issues. A critical error appears when the report owner does not meet the minimum security requirements to maintain or run the report.
From the Workday HCM Reporting documentation:
"When transferring ownership of a custom report, the new owner must have access to all fields and data sources used in the report. If access is missing, the Custom Report Exception Audit will flag the report with an error."
"Critical errors indicate security or configuration issues that must be resolved for the report to function correctly." The other options are incorrect because location has no impact on report ownership, prompts are supported in reports, and sharing controls visibility-not ownership validity.
NEW QUESTION # 12
A report that uses an indexed data source is running slowly for an HR analyst. The report is sorted by the Worker object field.
What can you do to improve the sorting performance?
- A. Change the data source on the report
- B. Create a calculated field that only pulls the first name of the worker
- C. Sort by the Full Name (text) field instead
- D. Select the Sort by First Accessible Column checkbox
Answer: C
Explanation:
When reports use Indexed Data Sources, performance issues can arise if sorting is attempted on fields that are not indexed. In the case of the Worker object, sorting directly by the Worker object field is slower. Workday best practice is to sort by text-based fields such as the "Full Name (text)" field, which improves query performance because it leverages indexed fields.
From the Workday reporting materials:
*"For indexed data sources, performance improves when sorting by text fields such as Full Name (text), instead of object fields. Sorting by object fields causes slower performance, whereas text-based fields use the
NEW QUESTION # 13
A user runs a custom report that shows employee performance data using the Rating - Current report field. The user wants to view the ratings of other teams to compare their team's performance. Upon running the report, the user is only able to view the instances for their direct reports.
What additional security configuration would the user need to view all instances of the performance data?
- A. Access to the data source filter used in the report
- B. Unconstrained access to the data source used in the report
- C. Constrained access to the report field used in the report
- D. Access to the security domain used in the report
Answer: B
Explanation:
Workday's configurable security model determines how much data a user can see in reports. If a user can only see their direct reports, they currently have constrained access. To view performance data for all workers, the user requires unconstrained access to the data source tied to the report field.
From Workday security documentation:
"Constrained security groups grant members access only to a subset of data... Unconstrained security groups grant users access to all target instances of a securable item." Therefore, the user needs D. Unconstrained access to the data source used in the report.
NEW QUESTION # 14
A user needs to view additional data on the delivered Headcount By Job Profile report.
What should you recommend?
- A. Edit the standard report
- B. Create a custom report from scratch
- C. Copy and modify the standard report
- D. Export the standard report to a data warehouse
Answer: C
Explanation:
Workday delivers many standard (delivered) reports that are available to all customers. These reports are a great starting point but are not editable directly. If the delivered report does not meet your requirements, you should copy it and then modify the copy to create a custom report. This ensures that you retain the delivered report as-is, while still tailoring the report output to your business needs.
From the Workday Module 1 and 2 Reporting sections:
"Workday delivers standard reports that are available for all customers. If necessary, you can copy many of the Workday-delivered reports to create a custom report and modify it as needed."
"There still may not be a report that meets my specific needs though. In that case, I can either create a report from scratch or copy a delivered report and make changes."
"Standard reports are already available in all customer tenants and span across the functional areas in Workday. Workday creates standard reports using either the report writer tool or XpressO. However, you can copy and modify reports created with report writer as needed." Therefore, the correct recommendation is to copy and modify the delivered Headcount By Job Profile report (Option D) instead of editing the original.
NEW QUESTION # 15
The HR administrator is complaining about a report that is running slowly. The report uses the Trended Workers data source and includes a field on the related Worker business object.
How can you improve report performance without altering the report requirements?
- A. Run the Create Worker Trending Data task.
- B. Run the Purge Worker Trending Data task.
- C. Add the field to the Trended Workers data source.
- D. Create a calculated field on the Trended Worker business object.
Answer: C
Explanation:
Performance issues often occur when trending reports pull fields from related business objects instead of directly from the Trended Workers data source. This requires Workday to join across objects at runtime, slowing down report execution. To improve performance, you should add the required field to the Trended Workers data source, ensuring the data is pre-joined and optimized for trending.
From the Workday binder: "To improve performance, add commonly reported fields directly to the Trended Workers object. Using related business object fields requires additional joins and increases report runtime." Creating calculated fields adds complexity rather than improving speed. Purging or re-creating trending data maintains system hygiene but does not address field-level performance.
Thus, the correct solution is A. Add the field to the Trended Workers data source.
NEW QUESTION # 16
A composite report sorts output based on the last column in ascending order. You want the sort to be based on the second to last column in descending order.
How do you make this change?
- A. Edit the second to last column.
- B. Create a dynamic data row.
- C. Update the report settings.
- D. Edit the combine data row.
Answer: A
Explanation:
Sorting in composite reports is determined at the column level, not at the combine row or general report settings. If the output currently sorts by the last column, that is because the sort option was applied there. To change the sorting behavior to the second-to-last column and in descending order, you must edit that specific column's configuration.
From the Workday binder: "Composite reports allow sorting based on columns. To change sorting behavior, adjust the column configuration, specifying ascending or descending order." The other options are incorrect: "combine data row" merges subreport outputs, not sorting; "dynamic data row" generates flexible rows but doesn't control sorting; and "report settings" manage prompts and scheduling, not output order.
Therefore, the correct action is B. Edit the second to last column.
NEW QUESTION # 17
You have selected the Enable As Worklet checkbox on a report definition and added the Recruiting dashboard in the Available On field. You share the report definition with all authorized users and run the Recruiting dashboard but the worklet is not appearing.
What could be the reason for this?
- A. Your security needs to be updated to view the worklet.
- B. The worklet has more than 100 rows of data.
- C. The worklet needs to be setup as required on the dashboard.
- D. You need to configure the Recruiting dashboard to include the worklet.
Answer: D
Explanation:
Enabling a report as a worklet and assigning it to a dashboard does not automatically make it visible. The Recruiting dashboard (or any dashboard in Workday) must be configured to include the worklet explicitly. This is a common oversight-report designers assume that enabling a report as a worklet is sufficient, but the dashboard itself must be updated in configuration to display that worklet tile.
From the Workday reporting materials: "Dashboards provide an interface to view multiple worklets. Even if a report is enabled as a worklet, the dashboard configuration determines which worklets are visible to end users." Other options are less relevant: exceeding 100 rows only impacts loading performance, not visibility; security issues would typically block data, not hide the worklet entirely; and required setup applies to whether the worklet is optional or required, but it must still be added to the dashboard.
Thus, the correct reason is B. You need to configure the Recruiting dashboard to include the worklet.
NEW QUESTION # 18
Refer to the following scenario to answer the question below.
You have prepared the following matrix report for a recruiting manager.
The recruiting manager wants the rows to sort by Total Count, rather than Total Average Base Pay.
How can you adjust the report definition to address this requirement?
- A. Adjust the Maximum Number of Rows value.
- B. Add a new row to the grid on the Filter tab.
- C. Reorder the rows in the Define the Field(s) to Summarize grid.
- D. Add a new row to the grid on the Sort tab.
Answer: D
Explanation:
In Workday reporting, row ordering is controlled on the Sort tab of the report definition. If you want the rows in a matrix report to sort by a specific field (such as Total Count), you must add that field to the Sort tab. Filters limit records, and summarizations define metrics, but sorting rules are explicitly defined in the Sort configuration.
From the Workday Reporting documentation:
"Sort - Control the order to present and group data. You can specify options for subtotals, grand totals, and outlines. Add a row on the Sort tab to define sorting by a particular field." Therefore, to sort rows by Total Count instead of Total Average Base Pay, the correct step is C. Add a new row to the grid on the Sort tab.
NEW QUESTION # 19
You need to create a matrix report that evaluates the effectiveness of recruiters on each region.
How can you ensure the report displays the percentage of hires for each recruiter in relation to all recruiters and regions?
- A. Create a calculated field using the Sum function on the Number of Hires summarization
- B. Select the Percent of Overall Total option on the Number of Hires summarization
- C. Create a Calculation summarization to show the percentage of hires for each region
- D. Use a Count summarization to aggregate all data at the row level
Answer: B
Explanation:
Matrix reports in Workday allow grouping of data, applying summarizations, and drilling into the summaries for deeper analysis . To calculate percentages relative to the overall total, Workday provides a built-in summarization option called "Percent of Overall Total." This option is applied to numeric summarizations like "Number of Hires." From the Workday Reporting Guide:
"Matrix reports allow you to group data, summarize the metrics for each grouping, and drill into the summarizations for further analysis."
"You can apply different summarizations such as Count, Sum, Average, and Percent of Overall Total on numeric fields." (Matrix Report Options - Workday Module 1 Binder) Therefore, to show the percentage of hires per recruiter relative to the grand total across recruiters and regions, you would select "Percent of Overall Total" on the Number of Hires summarization.
NEW QUESTION # 20
You want the ability to view every summarization in the composite report by Location.
What do you do?
- A. Include Location as a drillable field in all the subreports.
- B. Include Location as a Detail Data field in all the subreports.
- C. Include Location as a drillable field in one of the subreports.
- D. Include Location as a Detail Data field in one of the subreports.
Answer: B
Explanation:
In composite reports, summarizations are driven by Detail Data fields provided by each subreport. If you want to summarize results consistently by Location across the entire composite report, Location must exist as a Detail Data field in every subreport.
Workday requires this consistency because composite-level summarizations rely on common fields across all subreports. If Location is missing from even one subreport's detail data, Workday cannot reliably aggregate or align summarizations by that field.
From the Workday HCM Reporting documentation:
"To summarize composite report data by a specific field, that field must be included as detail data in all subreports."
"Drillable fields enable navigation but do not support composite-level summarization." Including Location as drillable only affects drill-down behavior, not summarization. Including it in only one subreport results in incomplete aggregation.
NEW QUESTION # 21
An HR analyst needs to schedule a collection of diversity reports to the HR director on a monthly basis. What mechanism should the HR analyst use to do this?
- A. Alerts
- B. Report groups
- C. Report bursting
- D. Embedded analytics
Answer: B
Explanation:
Report groups allow multiple reports to be bundled together and scheduled as a package to distribute at a set frequency. In this case, the HR analyst can group all diversity-related reports and schedule them to run automatically each month for the HR director.
The Workday documentation explains: "Workday provides additional reporting features such as sharing, scheduling, and exporting reports. Reports can be grouped into report groups for easier scheduling and delivery." .
While Report Bursting is used for distributing a single report with different data slices (e.g., sending each manager their team's results), it is not suited for bundling multiple different reports. Embedded analytics are dashboards, not scheduling tools. Alerts notify users of conditions but do not manage recurring report packages.
Therefore, Report Groups is the correct method for scheduling multiple reports together.
NEW QUESTION # 22
A recruiter is running a dashboard and no data is appearing in the Top New Applications by Job Profile worklet tile.
What could be the cause of the issue?
- A. The recruiter does not have access to the domain securing the dashboard.
- B. The recruiter has constrained access to the report's data source or data source filter.
- C. The dashboard configuration does not include Top New Applications by Job Profile as a required worklet.
- D. The recruiter does not have access to the Top New Applications by Job Profile report.
Answer: B
Explanation:
If a recruiter sees an empty dashboard tile, the most likely cause is constrained security access. Even though the dashboard is properly configured and the worklet is enabled, Workday's security framework ensures that report results vary by user depending on their role and assigned constraints.
From the Workday Reporting binder: "Report results differ between users if security constraints apply. Constrained security groups grant access only to a subset of data... Unconstrained security groups grant users access to all target instances of a securable item." .
In this scenario, the recruiter likely has constrained access to only their supervisory organization or region. As a result, the "Top New Applications by Job Profile" report returns no records in the worklet tile.
Other options are less likely: if the recruiter lacked access to the report entirely, the tile would not appear; required vs. optional dashboard configuration would not impact existing data visibility; and domain-level security applies to report access, not data filtering.
Therefore, the correct answer is C. The recruiter has constrained access to the report's data source or data source filter.
NEW QUESTION # 23
You need to create a report to show the trend of worker headcount over time.
What is the most appropriate data source for this report?
- A. Trended Workers
- B. Headcount
- C. Workers for HCM Reporting
- D. Worker History
Answer: A
Explanation:
The Trended Workers data source is specifically designed for reports that display trends over time, such as headcount, turnover, and demographics. It captures periodic snapshots of worker data (monthly, quarterly, etc.), which allows organizations to track workforce metrics historically.
From the Workday binder: "Trended Workers captures snapshots of worker data at periodic intervals, providing historical reporting across time dimensions. This enables reporting on headcount, attrition, and demographics in a time series format." By contrast, Workers for HCM Reporting is used for current-state data, not trending. Worker History provides effective-dated transaction-level history but does not automatically generate trending snapshots. Headcount is a standard delivered report and not a reusable data source for custom trending analysis.
Therefore, the most appropriate data source for worker headcount trends over time is A. Trended Workers.
NEW QUESTION # 24
An HR analyst has many visualizations in different discovery boards that use the Workers for HCM Reporting data source on the Worker primary business object. The analyst wants to drill into one of the visualizations by Worker. Upon drilling, the analyst notices that Worker is not a listed Drill By field option. They want to drill by Worker without editing the Drill By list of the other visualizations.
How would the analyst configure this?
- A. Override the Drill By field list and add Worker in the Configuration Panel for this visualization.
- B. Add Worker as a Drill By field from the Maintain Field Lists for Discovery Boards report.
- C. Drag and drop the Worker field in one of the dimensions of this visualization in the Builder Panel.
- D. Create a control from a sheet filter and filter the data by Worker from the Control Panel.
Answer: A
Explanation:
In Discovery Boards, drill behavior is defined in the Drill By field list. To add Worker as a drillable option in just one visualization, the analyst can override the Drill By list in the Configuration Panel of that visualization. This allows Worker to appear as a drill dimension without altering the defaults applied across other visualizations.
From the Workday documentation: "You can override Drill By field lists in the visualization configuration panel. This enables drill customization on a per-visualization basis without impacting other discovery boards." The other options are less appropriate: Maintain Field Lists changes the default for all boards; adding Worker as a dimension affects grouping, not drilling; and sheet filter controls allow filtering but do not add drill options.
Thus, the correct choice is D. Override the Drill By field list and add Worker in the Configuration Panel for this visualization.
NEW QUESTION # 25
......
Try Best Workday-Pro-HCM-Reporting Exam Questions from Training Expert Free4Dump: https://www.free4dump.com/Workday-Pro-HCM-Reporting-braindumps-torrent.html
Practice Examples and Dumps & Tips for 2026 Latest Workday-Pro-HCM-Reporting Valid Tests Dumps: https://drive.google.com/open?id=1cdvLMHJw2vGaRBM2TslrsWaSgzmEShtC