100% Pass Top-selling NCA-5.15 Exams - New 2021 Nutanix Pratice Exam
Nutanix Certified Associate Dumps NCA-5.15 Exam for Full Questions - Exam Study Guide
NEW QUESTION 29
Refer to the exhibit.
An administrator wants to make sure there are enough compute resources within the AHV-based Nutanix cluster during any maintenance operations or a node failure.
What configuration should the administrator change to achieve this task?
- A. Reserve 33% CPU and 33% memory
- B. Enable Degraded Node Detection
- C. Enable MA Reservation
- D. Set virtual machine affinity rules
Answer: C
NEW QUESTION 30
Which Nutanix concept is responsible for accommodating and remediating node failure scenarios?
- A. Life cycle management
- B. Data locality
- C. Auto resolve mode
- D. Self healing
Answer: B
NEW QUESTION 31
An administrator needs to provide data integrity at the application level for a VM that is replicated to a secondary site. Which requirement will satisfy this task?
- A. 1 VM per Consistency Group
- B. 1 VM per Availability Zone
- C. 1 VM per Schedule
- D. 1 VM per Protection Domain
Answer: C
NEW QUESTION 32
An administrator attempts to reinstall a VM's QuestOS, hut h unable to change the legacy BIOS hoot priority.
Based on the exhibit, what is causing this issue?
- A. GuestOS reinstall is not possible for a VM
- B. The CD-ROM is empty
- C. The VM is undergoing a snapshot
- D. The VM is currently on
Answer: D
NEW QUESTION 33
An administrator has recently added two additional nodes to an existing three-node Nutanix cluster, which hosts critical business application VMs. The administrator will tolerate losing up to two nodes simultaneously within the cluster.
Which two actions are required to achieve this with minimum effort? (Choose two.)
- A. Migrate VMs to new RF3 container
- B. Convert container to RF3
- C. Create a new RF3 container
- D. Modify cluster to RF3
Answer: B,D
NEW QUESTION 34
An administrator wants to copy some virtual machine disk files to ADSF from an external VMware ESXi host.
Which two actions should the administrator take to complete this task? (Choose two.)
- A. Configure Volume Group
- B. Configure whitelist on container
- C. Enable CHAP on Volume Group
- D. Mount container as NFS on external host
Answer: B,D
NEW QUESTION 35
Refer to the exhibit:
Based on the exhibit what can be definitively determined about Host DEMO-AHV-2'
- A. It is hosting a higher quantity of VMs than the other nodes.
- B. it has performed more on-disk lookups than the other nodes.
- C. It's cache is undersized compared to the other nodes.
- D. The system memory is undersized.
Answer: B
NEW QUESTION 36
An administrator has recently added two nodes to an existing three-node vSphere-based Nutanix cluster.
After adding the nodes to the cluster, the administrator tries to migrate a few VMs to the new nodes, but found that no datastore exist on these new nodes yet What action should the administrator take to resolve this issue?
- A. Click Mount on all ESXi hosts on containers
- B. Configure iSCSl Software Adapter on hosts
- C. Add the host IP addresses to cluster whitelists
- D. Configure the firewall to allow NFS datastore access
Answer: A
NEW QUESTION 37
Which Nutanix cluster component is responsible for triggering data movement events between SSD and HDD tiers?
- A. Cassandra
- B. ILM
- C. Genesis
- D. OpLog
Answer: B
NEW QUESTION 38
An administrator has a SQL VM running, which is experiencing high disk latency.
What could the administrator do to alleviate this?
- A. Attach additional Volume Groups to the VM
- B. Create another Storage Container
- C. Add more CPU and Memory to the VM
- D. Increase CPU and Memory on the CVM
Answer: B
NEW QUESTION 39
An administrator with an AHV cluster notices that time/date stamps in logs for some VMs are not correct.
After investigating, the administrator finds that many of their user VMs are set to UTC What two methods can be used to resolve the issue? (Choose two.)
- A. Configure the time zone for each VM using Prism.
- B. Configure NTP within Prism.
- C. Configure NTP inside each guest VM.
- D. Configure the VMs time zone inside each guest VM.
Answer: A,B
NEW QUESTION 40
A company's security team has requested that all IT resources be hardened.
What should an administrator do to increase the security of the Nutanix environment?
- A. Enable STIG
- B. Enable Flow
- C. Enable Cluster Lockdown
- D. Enable Prism Central KMS
Answer: C
NEW QUESTION 41
An administrator needs to expand a Nutanix cluster that is tagging the network traffic at the CVM and AHV level. However, the administrator doesn't remember the configured VLAN ID.
Which command can the administrator run to find the correct VLAN ID from the CVM?
- A. manage-ovs
- B. ovs-vscl
- C. acli
- D. ifconfig
Answer: B
NEW QUESTION 42
Which two advanced features requires you to install Nutanix Guest Tools (NGT)? (Choose two.)
- A. File recovery from a third-party backup
- B. Live Migration of a VM between AHV & other Hypervisors
- C. Self-service file-level recovery from VM snapshots
- D. Disaster Recovery of a VM between AHV and ESXi Hypervisors
Answer: C,D
NEW QUESTION 43
Refer to the exhibit.
An administrator notices that the Data Resiliency Statue of some components has been reduced to 0. making it impossible to support a node failure in the cluster.
What type of failure is most likely the cause of this issue?
- A. Disk
- B. Nods
- C. Block
- D. CVM
Answer: D
NEW QUESTION 44
Refer to the exhibit.
Management has tasked an administrator to restore the VM, VMforQuestion to a previous point in time (3:20pm), to recover from a corrupted set of files.
Which snapshot should the administrator choose, and which action(s) should be executed?
- A. Snapshot 2 Restore
- B. Snapshot 2 Details review restore points. then Clone
- C. Snapshot 1, Restore
- D. Snapshot 1 Details, review restore points. then Clone
Answer: D
NEW QUESTION 45
Refer to the exhibit.
An administrator needs to upgrade a VM to 10 virtual processors. Which action should the administrator take to complete this task?
- A. Power-off the VM and add one vCPU
- B. Update the VM adding two vCPUs
- C. Update the VM adding two cores
- D. Power-off the VM and add one core
Answer: C
NEW QUESTION 46
An administrator has moved several workloads from a legacy vSphere virtual infrastructure to a modern Nutanix AHV cluster. After performing this action the administrator realizes they are missing vCenter inventories that would be used to classify the VMs by specific prefixes.
What is the fastest way in Prism Central to group VMs with the specified criteria?
- A. Fitters
- B. Analysis
- C. Categories
- D. Projects
Answer: C
NEW QUESTION 47
An administrator recently installed Prism Central to use Categories. After having created Categories and Values, the administrator needs to apply these Categories to multiple workloads.
How can the administrator easily perform this task?
- A. Choose multiple VMs and select Manage Categories
- B. Create a Playbook to automate the process
- C. Manage the VMs ownership
- D. Go to Categories and select the VMs to be added
Answer: A
NEW QUESTION 48
A developer requests that a VM connects to a block device from an older ISCSI disk array, in order to support an application being transitioned to Nutanix.
What should the Nutanix administrator do to complete this task?
- A. Add the array to the whitelist to access the storage container directly.
- B. Use Volumes to add the device as a drive letter.
- C. Use Flits to map a network drive letter.
- D. Add the VM to the whitelist to allow it to access the block device.
Answer: B
NEW QUESTION 49
An administrator needs to replace a node in a three-node cluster. The health status for the environment is good and the cluster is able to support a single node failure.
Which step must be performed first?
- A. Remove the failed node from the cluster
- B. Verify hypervisor versions
- C. Plug in all network cables
- D. Expand the cluster with the new node
Answer: D
NEW QUESTION 50
An administrator wants a VM to communicate with two separate VLANs. What steps should the administrator complete?
- A. Configure a Security Policy to assign VLANs to the VM
- B. Turn on IPAM for autoconfiguration of VLANs
- C. Add a single NIC to the VM and configure it for both VLANs
- D. Add two NICs to the VM and configure one for each VLAN
Answer: D
NEW QUESTION 51
An administrator notices that a VM is slow and unresponsive. The administrator wants to compare performance to other VMs on cluster.
Which chart type is best suited to display multiple VM performance metrics for diagnosis?
- A. Entity Chart
- B. Dashboard Chart
- C. Metric Chart
- D. Analysis Chart
Answer: C
NEW QUESTION 52
How can an administrator access a Windows VM running on a Nutanix cluster if it is unreachable via ping?
- A. Connect using Xi Frame
- B. Open a Virtual Console through Prism Element
- C. Open a Virtual Console through Prism Central
- D. Connect using RDP
Answer: B
NEW QUESTION 53
......
Authentic Best resources for NCA-5.15 Online Practice Exam: https://www.free4dump.com/NCA-5.15-braindumps-torrent.html