[Apr-2023] The Cisco 300-430 Exam Test For Brief Preparation
Revolutionary Guide To Exam Cisco Dumps
NEW QUESTION 28
An IT administrator is managing a wireless network in which most devices are Apple iOS. A QoS issue must be addressed on the WLANs. Which configuration must be performed?
- A. Enable WMM TSPEC/TCLAS negotiation under Wireless > Advanced.
- B. Enable Fastlane under each WLAN setting.
- C. Enable Fastlane globally under Wireless > Access Points > Global Configuration.
- D. Create a new AVC Profile named AUTOQOS-AVC-PROFILE and apply to all WLANs.
Answer: B
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/technotes/86/Enterprise_Best_Practices_for_iOS_devices_and_Mac_computers_on_Cisco_Wireless_LAN.pdf
NEW QUESTION 29
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
- A. 10 seconds
- B. 60 seconds
- C. 30 seconds
- D. 15 seconds
Answer: D
Explanation:
NEW QUESTION 30
What must be configured on ISE version 2.1 BYOD when using Single SSID?
- A. no authentication
- B. WPA2
- C. 802.1x
- D. open authentication
Answer: C
Explanation:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/BYOD-configuration
NEW QUESTION 31
What is configured to use more than one port on the OEAP to extend the wired network's?
- A. AAA override
- B. remote LAN ACL
- C. client load balancing
- D. remote LAN
Answer: D
Explanation:
NEW QUESTION 32
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConned mode with central switching enabled
- B. FlexConnect mode with OfficeExtend enabled
- C. FlexConnect mode with central authentication
- D. FlexConnect mode with local authentication
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12
NEW QUESTION 33
A network engineer is implementing BYOD on a wireless network. Based on the customer requirements, a dual SSID approach must be taken. Which two advanced WLAN configurations must be performed? (Choose two.)
- A. Set NAC State to Radius NA
- B. Select Enable Session Timeout.
- C. Set DHCP Addr. Assignment to Required.
- D. Select DHCP Profiling.
- E. Set Allow AAA Override to Enabled.
Answer: A,D
NEW QUESTION 34
An engineer needs to configure an autonomous AP for 802.Ix authentication. To achieve the highest security an authentication server is used for user authentication During testing, the AP fails to pass the user authentication request to the authentication server. Which two details need to be configured on the AP to allow communicator! between the server and the AP? (Choose two.)
- A. Group name
- B. PAC encryption key
- C. RADIUS IP address
- D. Username and password
- E. Shared secret
Answer: C,E
NEW QUESTION 35
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
- A. 10 seconds
- B. 60 seconds
- C. 30 seconds
- D. 15 seconds
Answer: D
NEW QUESTION 36
The security policy mandates that only controller web management traffic is allowed from the IT subnet. In testing, an engineer is trying to connect to a WLAN with Web Authentication for guest users, but the page is timing out on the wireless client browser. What is the cause of the issue?
- A. Web Authentication Redirect is not supported with CPU ACLs.
- B. The implemented CPU ACL on the controller is blocking HTTP/HTTPS traffic from the guest clients.
- C. The DNS server that is configured on the controller is incorrect.
- D. Web Authentication Redirect is supported only with Internet Explorer, and the client is using Google Chrome.
Answer: B
NEW QUESTION 37
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Change the AVC application WebEx-app-sharing to mark
- B. Create an ACL for WebEx
- C. Change the WLAN reserved bandwidth for WebEx
- D. Create an AVC profile for WebEx
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html
NEW QUESTION 38
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The Cisco WLC is configured for the incorrect date.
- B. The user is using invalid credentials.
- C. The client is falling to accept certificate.
- D. The Cisco WLC local EAP profile is misconfigured
Answer: B
NEW QUESTION 39
What is configured to use more than one port on the OEAP to extend the wired network's?
- A. AAA override
- B. remote LAN ACL
- C. client load balancing
- D. remote LAN
Answer: D
Explanation:
NEW QUESTION 40
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
- A. Wireless Intrusion Prevention System
- B. Cisco Mobility Services Engine
- C. Cisco Hyperlocation Module
- D. Cisco Connected Mobile Experiences
Answer: D
NEW QUESTION 41
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: monitor, Ap submode: none
- B. Ap mode: monitor, Ap submode: WIPS
- C. Ap mode: local, Ap submode: WIPS
- D. Ap mode: local, Ap submode: none
Answer: C
Explanation:
NEW QUESTION 42
An engineer completed the basic installation for two Cisco CMX servers and is in the process of configuring high availability, but it fails. Which two statements about the root of the issue are true? (Choose two.)
- A. The Cisco CMX instances are installed in the same subnet.
- B. The delay between the primary and secondary instance is 200 ms.
- C. The sizes of the primary and secondary Cisco CMX installations differ.
- D. The types of the primary and secondary Cisco CMX installations differ.
- E. Both Cisco CMX installations are virtual.
Answer: C,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/106/cmx_config/b_cg_cmx106/managing_cisco_cmx_system_settings.html Pre-requisites for HA Both the primary and the secondary server should be of the same size and the same type (VM or physical appliance).
Both the primary and the secondary server should have the same Cisco CMX version.
Both the primary and the secondary server should be connected on the same subnet.
Both the primary and the secondary server should be connected on the same subnet if Layer 2 HA is required.
Both the primary and the secondary server should be IP connected with delay of less then 250ms if Layer 3 HA is used.
From Cisco CMX release 10.6.2, NTP server settings must be configured on both Primary and Secondary server instance before HA pairing starts. We recommend that you use the same NTP server on both Primary and Secondary. As a Cisco CMX admin you can also use a dedicated NTP for Primary and Secondary.
NEW QUESTION 43
......
Cisco 300-430: Details + Topics
This test is also called Implementing Cisco Wireless Networks or ENWLSI. It is among the concentration exams for CCNP Enterprise that you need to choose from. You select it from a list of tests that also include Cisco 300-410, Cisco 300-415, Cisco 300-420, Cisco 300-425, and Cisco 300-435. The 300-430 exam is offered in English and Japanese only, and you will have 1 hour and 30 minutes to deal with about 60 questions. The expected question formats include testlets, multiple choice, and fill-in-the-blank.
The Cisco 300-430 exam is administered through Pearson VUE and the registration fee is $300. The official passing score is 825 points, so try to earn more than that. If you want to schedule this test, you have to create an account on the Pearson VUE platform and follow the instructions up to the end.
QoS on Wireless Networks
This topic covers about 10% of the exam questions, and the test takers have to perform their competence in the following operations:
- Implementing the Quality of Service for the wireless clients;
- Implementing the Quality of Service schemes according to the prerequisites such as wireless and wired mapping;
- Implementing ACV, which includes Fastlane.
300-430 Free Study Guide! with New Questions: https://www.free4dump.com/300-430-braindumps-torrent.html
Pass 300-430 Exam Latest Practice Questions: https://drive.google.com/open?id=1mr2-uH_2zeeSSHTk-teANoYA0OGvymB6