[Aug 02, 2021] Updates Up to 365 days On Valid NCP-MCI-5.15 Braindumps
Best QualityNCP-MCI-5.15 Exam Questions Nutanix Test To Gain Brilliante Result
NEW QUESTION 60
what is included in, or enabled by, the nutanix NGT bundle? (Choose two)
- A. mouse and keyboard emulation
- B. mobility drivers
- C. application consistent snapshot
- D. crash consistent snapshot
Answer: B,C
NEW QUESTION 61
An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons. The administrator puts the host in maintenance mode.
What should the administrator do to perform an orderly shutdown of the CVM?
- A. Execute the cvm_shutdown -P now command from the host.
- B. Execute the cvm_shutdown -P new command from the CVM.
- C. Enter Fewer off Server-orderly Shutdown from the IPMI console.
- D. Enter Fever off Server - immediate from the IPMI console.
Answer: A
NEW QUESTION 62
In which two scenarios is Nutanix Key Management Server supported?
- A. Data-at-Rest Encryption
- B. XenServer and AHV mixed cluster
- C. KVM and AHV mixed cluster
- D. Cluster's local KMS.
Answer: B,C
NEW QUESTION 63
An administrator needs to report on any alerts generated by a Nutanix cluster that affected the cluster's availability over the past 10 days.
Which method should be used to locate these events?
- A. Configure an Alert Policy to generate an email with the data on the Health dashboard.
- B. Export the cluster event log to a CSV on the Alerts dashboard.
- C. On the Health dashboard, use the Log Collector to export data based on time stamp.
- D. On the Alerts dashboard, filter based on Impact Type and the desired Time Range.
Answer: D
Explanation:
Reference:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v55:mulalerts-management-pc-c.html
NEW QUESTION 64
An administrator needs to determine current CPU usage across multiple clusters.
Which method should the administrator use to generate this type of report?
- A. Prism Central, Explore, Hosts
- B. Prism Central, Explore, Clusters
- C. Prism Central, Home, Add Widgets
- D. Prism Central, Home, Manage Dashboards
Answer: C
NEW QUESTION 65
Which service performs snapshots in an AOS 5.15 implementations?
- A. Stargate
- B. Medusa
- C. Prism
- D. Zookeeper
Answer: B
NEW QUESTION 66
An administrator has a 3-node Nutanix cluster. The administrator stores critical data on a VM that runs on the cluster Data must still be available through two host failures.
Which three configuration steps must the administrator take to meet this requirement?
- A. Increase CVM memory to 24GB
- B. Convert the containers from RF2 to RF3
- C. Add 3 nodes to the cluster
- D. Convert the cluster from RF2 to RF3
- E. Enable Compression for more space
Answer: B,C,D
NEW QUESTION 67
Which two methods are valid for migrating a VM from a Nutanix vSphere cluster to AHV? (Choose two.)
- A. Nutanix Move
- B. Live Migration
- C. Cross-Hypervisor DR
- D. Storage vMotion
Answer: A,C
Explanation:
Reference:
https://hyperhci.com/2019/08/29/cross-hypervisor-migration-to-from-nutanix-ahv/
https://next.nutanix.com/blog-40/migrate-your-vms-to-ahv-with-minimum-downtime-31786
NEW QUESTION 68
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. Email Digest
- B. Syslog
- C. Individual Alerts
- D. SNMP
Answer: A
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_management_pc_c.html Prism Central allows you to configure the alert messages sent by Prism Central. To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case. Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
* Do one of the following:
* In the gear icon pull-down list of the main menu, select Alert Email Configuration.
* In the Alerts dashboard, click the Email Configuration button.
The Alert Email Configuration window appears.
* Click the Settings tab and do the following:
* Enable Prism Central to sent alert emails.
* Check the Email Every Alert box to send an email whenever the event occurs.
* Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
* Check the Nutanix Support box to send alert notification to Nutanix customer support.
* To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
* Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
NEW QUESTION 69
How will an HDD failure affect VMs with data on the failed device?
- A. The VMs will remain operational on that host and continue to function normally with no noticeable impact
- B. An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.
- C. The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.
- D. A live migration will be initiated, moving the affected VMs to a host that contains the replica data.
Answer: A
NEW QUESTION 70
A node with Erasure Coding fails.
What is the impact?
- A. Increased Controller VM CPU Load.
- B. Potentially increased amount of data stored in the SSD tier.
- C. AQS unable to do deduplication during the Erasure Coding failure.
- D. The node stops utilizing Erasure Coding.
Answer: A
NEW QUESTION 71
An administrator wants to view the total IOPs, read & write IOPs on a single graph in prism Which type of chart on the analysis is capable of allowing this view?
- A. performance chart
- B. entity chart
- C. metric chart
- D. measurement charts
Answer: B
NEW QUESTION 72
Which bond mode is the default mode on an AHV Nutanix cluster?
- A. Balance TCP
- B. Link Aggregation
- C. Balanced SLB
- D. Active - Backup
Answer: D
NEW QUESTION 73
An administrator wants to be able to manage their application from prism central.
Which feature must the administrator enable to allow for application management?
- A. Capacity runaway
- B. self-service portal
- C. entity explorer
- D. Image management
Answer: B
NEW QUESTION 74
An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.
Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?
- A. A cluster entity chart with each of the relevant metrics
- B. A VM entity chart with each of the relevant metrics.
- C. A cluster metric chart for each of the relevant metrics
- D. A VM metric chart for each of the relevant metrics
Answer: A
NEW QUESTION 75
Which two methods should an administrator employ to set up the AHV host VLAN in a cluster to follow Nutanix recommendations? (Choose two)
- A. Add all VMs to the default VLAN0 on bridge br1.
- B. Add the CVM and the AHV host to the same VLAN.
- C. Add all VMs to a new VLAN other than VLAN 0.
- D. Avoid adding guest VMs to the CVM and host VLAN.
Answer: B,C
NEW QUESTION 76
Which two factors should be considered when planning to migrate VMs to AHV? (Choose two.)
- A. iSCSI MPIO Version
- B. Active Directory Domain
- C. Downtime Requirements
- D. Guest Operating System
Answer: A,C
NEW QUESTION 77
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
- A. Add a new switch to the network and connect 1Gb interfaces to it.
- B. Change the VLAN ID to a higher priority ID.
- C. Change the bond mode to balance-slb or balance-tcp.
- D. Connect the 10Gb interfaces to the physical switch.
- E. Remove any 1Gb interfaces still connected from the default bond.
Answer: B,C,D
NEW QUESTION 78
An administrator wants to configure Near Sync an AOS 5.15 implementations. The Cluster has the following characteristic
1) 2 nodes at both the primary and remote site
2) 60 TB of storage on each node
3) 1.9 TB SSD disks in each node
4) 8 VMs per protection domain
5) A mix of ESXi and AHV hypervisor
What three steps would need to be taken successfully enable Near Sync? (Choose Three)
- A. Increase the number of nodes at both sites to a minimum of three
- B. Increase the amount of VMs in each protection domain to at least 10
- C. Reduce the SSD disks type 2 no more than 1 TB
- D. Reduce the amount of storage on each node to more than 40 TB
- E. Use all AHV or all ESXi hypervisor in the implementations
Answer: A,B,E
NEW QUESTION 79
In Files, how many FSVMs are deployed by default?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 80
An administrator is creating a Protection Domain to back up multiple application environments.
Which mechanism does Nutanix use to aggregate VMs with common backup and restore objectives?
- A. Consistency Groups
- B. Application Pools
- C. Policy-based Backups
- D. Availability Domains
Answer: A
NEW QUESTION 81
An Engineer logs into a CVM to troubleshoot connectivity loss between two CVMs and find the following interfaces subnets and WLANs configured.
-eth0 - VLAN10-10.1.10.0/24
eth01-No VLAN-192.168.5.0/24
eth2 - LAN20-10.1.20.0/24
Which two Nutanix networking features are being utilized? (Choose two)
- A. Backplane LAN
- B. Internal vSwitch
- C. Network Load balancing
- D. IP address management (IPAM)
Answer: A,B
NEW QUESTION 82
......
Focus on NCP-MCI-5.15 All-in-One Exam Guide For Quick Preparation: https://www.free4dump.com/NCP-MCI-5.15-braindumps-torrent.html