[Dec-2021] 1Z0-1079-20 Dumps PDF - 1Z0-1079-20 Real Exam Questions Answers
1Z0-1079-20 Dumps 100% Pass Guarantee With Latest Demo
NEW QUESTION 31
Given the information:
Which two options are correct for Service Preference configuration? (Choose two.)
- A. It is not mandatory to specify Agency Code.
- B. At the most sixty-four words can be specified in Exclude Words.
- C. If the Data Version ID is not specified, then the system will throw an error during screening that Data Version ID needs to be specified.
- D. Exclude Words is used to specify words to exclude when ONLY "Dice" Match Engine is used.
- E. If the Data Version ID is not specified and if there is a Restricted Parties List with a Data Version with the "Current" flag set, it will be used for screening.
Answer: B,E
NEW QUESTION 32
Identify the object in which Saved query cannot be used.
- A. Finders (Search pages)
- B. Automation Agents
- C. Business Monitors
- D. Reports
Answer: B
NEW QUESTION 33
Select the two true statements about OTM Agents. (Choose two.)
- A. Agents can send alerts when a condition has occurred, and they can also create or change data objects.
- B. Agents can send alerts when a condition has occurred, but they cannot create or change data objects.
- C. Agents can be configured to run multiple times on a time-based schedule.
- D. Agents "listen" for a condition to occur.
Answer: B,C
NEW QUESTION 34
Select the three business objects that can be managed using the Fleet Management module. (Choose three.)
- A. Fleet power units
- B. Driver time off, sick time, vacations, etc.
- C. Fleet equipment
- D. Driver work hours
- E. Driver payroll
Answer: B,C,E
NEW QUESTION 35
When assigning rules to service providers to support Freight Payment, which two statements are true? (Choose two.)
- A. The rules cannot be changed once assigned to a service provider.
- B. One can assign a match rule profile and an approval rule profile to a service provider.
- C. The Autopay check box should be selected for the rules to apply.
- D. Each service provider can have only one match rule profile assigned.
Answer: C,D
NEW QUESTION 36
Which two options must be defined for shipment planning? (Choose two.)
- A. Equipment
- B. Equipment Type
- C. Equipment Group
- D. Equipment Group Profile
- E. Equipment Class
Answer: A,B
NEW QUESTION 37
Which three options are available after a document has been assigned to a Customs transaction as a standard document? (Choose three.)
- A. Upload the document content.
- B. Generate the document content.
- C. View the document content.
- D. Validate the document content.
- E. Edit the document.
Answer: B,C,D
NEW QUESTION 38
Which two statements are true with respect to userID and domain relationship, during a standard OTM installation? (Choose two.)
- A. The DEFAULT userID is created in the ADMIN domain.
- B. The ADMIN userID is created in the DBA domain.
- C. The ADMIN userID is created in the GUEST domain.
- D. The GUEST userID is created in the SERVPROV domain.
- E. The GUEST userID is created in the PUBLIC domain.
Answer: A,B
NEW QUESTION 39
At which three levels does Match Rules allow the Invoice Matching to occur? (Choose three.)
- A. Order line level
- B. Shipment Ship Unit line level
- C. Shipment location level
- D. Shipment Ship Unit level
- E. Shipment level
Answer: A,C,E
NEW QUESTION 40
What is the difference between a BUY Shipment and a SELL Shipment?
- A. BUY Shipments are tendered to third party carriers, and SELL Shipments are tendered to a company's private Fleet.
- B. BUY Shipments are created by Planners in a Company domain for their own shipments, and SELL Shipments are created by Planners in a 3PL COMPANY domain for their clients' shipments.
- C. BUY Shipments are created for inbound (vendor Purchase Orders) shipments, and SELL Shipments are created for outbound (company Sales Orders) shipments.
- D. BUY Shipments are created when you wish to purchase services, and SELL Shipments are created when you wish to charge a customer for services.
Answer: B
NEW QUESTION 41
Assume that you have made changes to the Default Parameter Set. Which statement is true?
- A. Regardless of your user role, you won't be able to save the changes within the Default Parameter Set without renaming it first.
- B. In order to reset all the changed settings back to their original settings, select "Actions", then "Utilities", and then "Set Defaults" from the drop-down menu.
- C. In order to reset all the changed settings back to their original settings, you should review them on the screen and be able to tell which ones have been changed, and what the default settings were.
- D. In order to reset all the changed settings back to their original settings, you should delete the Parameter Set and recreate it using the Default as your template.
Answer: A
NEW QUESTION 42
View the exhibit.
Bob is a user in the "3PL COMPANY" domain and has been assigned the "Admin" User Role ID.
What must you do to make sure that Bob has the authority to view and plan all the orders from all the Client domains shown?
- A. Create a Role in each of the Client domains with the same name, and add Bob's user ID to the Role.
- B. Use OTM's VPD to assign Bob's user ID in each of the Client domains.
- C. Do nothing, because Bob will automatically be authorized to plan all of the orders.
- D. Use OTM's VPD to add Bob to the Planner Role in the 3PL COMPANY domain.
- E. Create a Role in the 3PL COMPANY domain that has at least "Default" authority, and use OTM's GRANTS to assign Bob's user ID in each of the Client domains.
Answer: E
NEW QUESTION 43
Which are the two ways in which Milestones differ from Agents? (Choose two.)
- A. Agents monitor for a condition to occur, whereas Monitors only start and stop based on a time-based schedule.
- B. Milestones may be made up of one or more Agents.
- C. Agents may be made up of one or more Milestones.
- D. Milestones may be both "reactive" (for example, they monitor for a condition to occur) and "proactive" (for example, they can initiate before, at, or a prescribed number of times after a condition occurs).
- E. Milestones monitor for a condition to occur, whereas Agents only start and stop based on a time-based schedule.
Answer: B,D
NEW QUESTION 44
Which four of the following components make up a Compliance Rule in Global Trade Management (GTM)?
(Choose four.)
- A. Control Type
- B. Control Code
- C. Commerce Control List
- D. Regime
- E. Region
Answer: A,B,D,E
NEW QUESTION 45
Which three statements are true when configuring allocation rules for OTM Freight Payment? (Choose three.)
- A. One cannot use the same rule in more than one allocation rule profile.
- B. For a service provider, one can assign one allocation rule based on the planned cost and another based on the actual cost.
- C. The allocation rules in the profile can be sequenced in the allocation rule profile.
- D. OTM uses the first allocation rule that applies.
- E. Allocation rules need to be set up before the allocation rule profiles.
Answer: B,D,E
NEW QUESTION 46
Your client company has a few systems keeping the Item Master, and requests Global Trade Management (GTM) be flexible on Item creation.
Which three options are true about Item creation in GTM in this scenario? (Choose three.)
- A. Items can be downloaded from the External Content Provider.
- B. Items can be uploaded by the Product Classification Template in GTM.
- C. Items can be sent from an ERP system, such as Oracle ERP Cloud, to GTM.
- D. Items can be manually created in the GTM UI.
- E. Items can be uploaded by CSV in GTM.
Answer: A,D,E
NEW QUESTION 47
How would you create an association in OTM if you want to associate a Match Rule to a specific Service Provider (carrier)?
- A. Create the Rule, then assign the Service Provider to the Rule.
- B. Create the Rule, assign the Rule to an appropriate Rule Profile, then assign the Rule Profile to the Service Provider.
- C. Create the Rule, assign the Rule to an appropriate Rule Profile, then assign the Service Provider to the Rule Profile.
- D. Create the Rule, then assign the Rule to the Service Provider.
Answer: D
NEW QUESTION 48
Which one of the following is the correct procedure for setting up and assigning a Screen Set ID to a User?
- A. Create a Screen Set ID and assign it to User.
- B. Create a Screen Set ID and assign it to Domain.
- C. Create a Screen set ID, assign it to Menu Manager and assign it to User.
- D. Always unassign existing menu and create a screen Set ID, assign it to User.
Answer: C
NEW QUESTION 49
Which statement is correct regarding the OTM Parameter Set?
- A. OTM allows only one Parameter Set, and it is stored in the PUBLIC domain.
- B. OTM allows more than one Parameter Set, but they must be stored in the PUBLIC domain.
- C. If you want to create a Parameter Set, you must name it "DEFAULT".
- D. There are less than 30 parameters that can be changed in the Default Parameter Set.
- E. Parameter Sets are mandatory during Bulk planning.
Answer: C
NEW QUESTION 50
Which three statements are true when setting up Match Rules for Freight Payment in OTM? (Choose three.)
- A. BM or Bill Of Lading is a mandatory shipment reference number qualifier to match to.
- B. You could specify several shipment reference values to match to.
- C. The match rule will apply to all invoices, unless only certain service providers are specified on the match rule.
- D. The matching rule could be different for different service providers.
- E. You need to specify at least one shipment reference number qualifier to match to.
Answer: A,D,E
NEW QUESTION 51
......
Difficulty in Writing Oracle 1Z0-1079-20: Oracle SCM Transportation and Global Trade Management Cloud 2020 Implementation Essentials Exam
Every exam seems difficult if not well prepared. One of the key problems faced by most candidates is to choose the right research materials for their exam preparation since they use the internet to find too much data that makes it difficult for them to trust, which would be helpful for them. The “How to study for Oracle 1Z0-1079-20 specifically focuses on required resources for best exam preparation. It is highly recommended to use the course contents mentioned in this document to search online and find relevant study material to get a know-how of what each topic is about. Learning resources and courses are provided by oracle. Oracle 1Z0-1079-20 exam is a simple exam with just a few course contents and can be very easy to solve if well prepared. Oracle 1Z0-1079-20 dumps are provided by Free4Dump and can be accessed via the links at the bottom of this document. Free4Dump have the most up to date 1Z0-1079-20 dumps pdf. Free4Dump also include practice testing, which proves to be an outstanding forum for testing the information gained. 1Z0-1079-20 practice exams provided on the oracle official website can also be very helpful to gain knowledge of the type of questions expected in the exam.
If the user has successfully passed the 1Z0-1079-20 practice exam and has been through 1Z0-1079-20 dumps then the certification exam will not be too much difficult as the user has shown an aptitude for understanding complicated processes.
Dumps Real Oracle 1Z0-1079-20 Exam Questions [Updated 2021]: https://www.free4dump.com/1Z0-1079-20-braindumps-torrent.html