Get all the Information About SAP C_IBP_2311 Exam 2024 Practice Test Questions [Q36-Q57]

Share

Get all the Information About SAP C_IBP_2311 Exam 2024 Practice Test Questions

Check Real SAP C_IBP_2311 Exam Question for Free (2024)


SAP C_IBP_2311 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Create and transform forecasts in your planning model
  • Use the Fiori Launchpad to customize the UI, work with Excel UI
Topic 2
  • Configure supply planning, run various solvers to generate planning results
  • Optimize the integration scenarios and architecture of your planning solution
Topic 3
  • Describe how IBP extends the logic of S&OP in the network using advanced demand
  • Display, create, copy, edit, check, and activate a planning area
Topic 4
  • Create and use key figures and attributes to model the supply chain
  • Define and view information with user-defined charts and dashboards
Topic 5
  • General Configuration of a Planning Area
  • Optimize inventory in the supply chain utilizing algorithms that derive inventory targets

 

NEW QUESTION # 36
What is an example of a commonly used time-independent key figure?

  • A. A currency conversion key figure, such as Exchange Rate
  • B. A Special key figure marked as an aggregate key figure (aggregate constraint)
  • C. A unit of measure key figure, such as UoM Conversion Factor
  • D. Any attribute as a key figure

Answer: C,D


NEW QUESTION # 37
Which of the following data can be tracked using a change-history-enabled key figure? Note: There are 3correct answers to this question

  • A. Modified code
  • B. Reason code
  • C. Scenario ID
  • D. Attributes
  • E. Key figure type

Answer: A,B,D


NEW QUESTION # 38
Which of the following solutions should be satisfied with violations penalized by the objective function ofthe time-series supply optimizer? Note: There are 3 correct answers to this question. Not adhering to maximum transport values

  • A. Violation of minimum aggregated inventory vales
  • B. Violation of minimum resource utilization
  • C. Not respecting production capacity
  • D. Not-fully satisfied demands

Answer: A,B,D


NEW QUESTION # 39
Model configuration allows the attributes of a master data type to be assigned as key figures Which feature is relevant for this type of object?

  • A. This type of key figure is not usually stored and it cannot be s itable
  • B. This object usually provides a single value for a unique planning combination
  • C. This type of key figure has better performance than a time-independent key figure
  • D. This object contains user-defined criteria that monitor the running of business plan

Answer: B


NEW QUESTION # 40
You are working with inventory key figures. What are some of the business scenarios where you can use the Last Period Aggregation function? Note: There are 2 correct answers to this question

  • A. Calculating how many periods inventory is going to last based on the planned demand
  • B. Searching for and returning the last not-full value of the inventory key figure
  • C. Calculating the value of inventory on on weekly basis, using static argentation from the daily 'evel
  • D. Calculating the value of inventory on any level from the time profile, ensuring flexibility of calculation

Answer: C,D


NEW QUESTION # 41
What option is available for the key figure that is enabled for fixing?

  • A. Fixing is possible for a part of key figure value on a certain planning level
  • B. You can change a fixed key figure only with administrative rights
  • C. Fixing is possible for certain period, Including all child values in the hierarchy
  • D. Fixing is possible for key figures with negative values

Answer: C


NEW QUESTION # 42
What are some of the key capabilities of SAP Integrated Business Planning for demand? Note: There are 3 correct answers to this question.

  • A. Automated, exception- based processing
  • B. Determination of coefficient of variation (CV)
  • C. Classifying demand into zones
  • D. Statistical analysis using the predictive analytics tools
  • E. Embedded, on-the-fly demand analytics

Answer: A,B,E


NEW QUESTION # 43
Which functional capabilities are included in SAP IBP for response and supply? Note: There are 2 correct answers to this question

  • A. Calculating buffer proposals
  • B. Analyse supply Usage
  • C. Detailed Production Scheduling
  • D. Gating Factor

Answer: B,D


NEW QUESTION # 44
Which of these conditions must be met to create a Local Member key figure? Note: There are 2 correct answers to this question

  • A. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel
  • B. Users should have authorization for template administration.
  • C. Use Excel Cell reference in the report editor option is selected
  • D. Activate Local Member recognition settings is selected

Answer: B,D


NEW QUESTION # 45
You are invited to review a problem with a customer's SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct answers to this question

  • A. Number of local members and complexity of calculation
  • B. Number of analytics charts displaying key figures' values
  • C. Excessive SAP IBP fromating in the Microsoft Excel UI
  • D. Complex calculation graphs for key figures

Answer: C,D


NEW QUESTION # 46
You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP. What are the integration toolsthat you can use with such a setup for data transfer? Note: There are 2 correct answers to this question.

  • A. SAP Cloud Integration for data services
  • B. SAP Smart data Integration
  • C. Core Interface
  • D. Real-time Integration

Answer: A,B


NEW QUESTION # 47
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct answers to this question.

  • A. Add Process instances
  • B. Display all assigned analytics on a single UI
  • C. Link two analytics charts.
  • D. Rename the charts
  • E. Use drill-down functionality

Answer: A,B,E


NEW QUESTION # 48
What are the relevant use cases for helper key figures? Note: There are 2 correct answers to this questions.

  • A. Used by end-users in planning views to help visualize cross-period calculations
  • B. Used to break down a large calculation into manageable subcalcuations
  • C. Used at any level of calculation level except the Request Level
  • D. Used when you have more than three inputs at the different planning level in one calculation

Answer: B,D


NEW QUESTION # 49
Which Maintenance, Repair, and Overhaul (MRO) parts planning processes are included in SAP Integrated Business Planning for Supply Chain? Note: There are 3 correct answers to this question.

  • A. Demand Driven Replenishment
  • B. Supply Planning
  • C. Inventory Optimization
  • D. SAP Intelligent Asset Management
  • E. Demand Planning

Answer: B,C,E


NEW QUESTION # 50
What is taken as an input for the demand sensing process? Note: There are 2 correct answers to this question.

  • A. Open Sales Order
  • B. Consensus Demand
  • C. Forecast Accuracy measures
  • D. Results of time series analysis

Answer: A,B


NEW QUESTION # 51
Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are 2correct answers to this question

  • A. Allocation planning
  • B. Multi-Level Supply Planning Heuristics
  • C. Simple statistical forecast
  • D. SAP Product Lifecycle Management

Answer: B,D


NEW QUESTION # 52
You are setting up planning with lot sizes. What are some of the properties of lot sizes that you need to beware of? Note: There are 2 correct answers to this question

  • A. Lot sizes are applicable for production and handling quantities.
  • B. Lot size are time-independent master data settings
  • C. Lot size are applicable for production and transportation quantities
  • D. Periodic lot size setting overrides the minimum lot size.

Answer: B,C


NEW QUESTION # 53
You are reviewing the master data types that are often used for supply and inventory planning. Which master data types are compound master data types? Note: There are 2 correct answers to this question

  • A. SOURCECUSTOMER
  • B. SOURCELOCATION
  • C. SOURCEPRODUCTION
  • D. SOURCECUSTGROUP

Answer: A,B


NEW QUESTION # 54
How do you achieve rolling aggregation with SAP IBP?

  • A. Using a key figure calculation
  • B. Using a local member
  • C. Using an attribute as a key figure
  • D. Using an appropriate period weight factor

Answer: A


NEW QUESTION # 55
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: Thereare 2 correct answers to this question.

  • A. These filters can be used together with attributes totals in the same planning view
  • B. The alerts dashboard is not available if a value-based filter is set for the open planning view
  • C. You can add (or delete) planning objects to a planning view after these filters are applied
  • D. You can only apply one value-based filter per planning view.

Answer: A,C


NEW QUESTION # 56
As an architect, you are configuring the Planner Workspaces user interface settings. Which appearance settings are on your to-do list? Note: There are 3 correct answers to this question

  • A. Adding planning view
  • B. Add custom alerts
  • C. Define key figure formatting
  • D. Add Navigation profile
  • E. Add playbooks for alerts

Answer: A,B,E


NEW QUESTION # 57
......

Use Free C_IBP_2311 Exam Questions that Stimulates Actual EXAM : https://www.free4dump.com/C_IBP_2311-braindumps-torrent.html

Get Ready to Boost your Prepare for your C_IBP_2311 Exam with 80 Questions: https://drive.google.com/open?id=1wIyqhQpvdiIkkKj80AEeYuPxNMGug9HN