[Jan-2022] 200-301 Exam Dumps - Free Demo & 365 Day Updates
Free Sales Ending Soon - Use Real 200-301 PDF Questions
Recommended Knowledge for Cisco 200-301 Exam
There are no official requirements set for the 200-301 certification exam, except for a solid understanding of its topics. However, Cisco recommends that the candidates for this test have a minimum of 1-year experience implementing and administering Cisco solutions. Their familiarity with IP addressing and network basics will be also helpful in passing this exam.
CCNA Certification Details
Attaining the new Cisco CCNA certification marks a critical step in building a career in information technology. This certification provides a detailed understanding of security fundamentals, IP services, IP connectivity, network fundamentals, and network access. Unlike in the past where students would attempt a series of exams to attain a Cisco certification at the associate level, today, they can certify by simply passing one exam coded 200-301.
NEW QUESTION 102
Which symptom most commonly indicates that two connecting interface are configured with a duplex mismatch?
- A. the spanning tree process shutting down
- B. an interface with down/down state
- C. late collisions on the interface
- D. an interface with up/down state
Answer: C
NEW QUESTION 103
Which two statements about UTP cables are true? (Choose two)
- A. Category 6 Ethernet cables are appropriate for installations of up to 200m
- B. All Ethernet cable types from Category 1 through Category 6 are suitable for transmitting data m the appropriate environments
- C. Category 5e Ethernet cables support speeds up to 1000 Mbps
- D. Category 5 Ethernet cables support speeds up to 1000 Mbps beyond 100m.
- E. Category 6a Ethernet cable can transmit up to 10 Gbps
Answer: C,E
NEW QUESTION 104
Which command is used to specify the delay time in seconds for LLDP to initialize on any interface?
- A. lldp holdtime
- B. lldp tlv-select
- C. lldp timer
- D. lldp reinit
Answer: D
NEW QUESTION 105
Refer to the exhibit.
Which three statements correctly describe Network Device A? (Choose three.)
- A. With a network wide mask of 255.255.255.0, must be a Layer 3 device for the PCs to communicate with each other.
- B. With a network wide mask of 255.255.255.128, each interface does not require an IP address.
- C. With a network wide mask of 255.255.255.128, each interface does require an IP address on a unique IP subnet.
- D. With a network wide mask of 255.255.254.0, each interface does not require an IP address.
- E. With a network wide mask of 255.255.255.0, must be a Layer 2 device for the PCs to communicate with each other.
Answer: A,C,D
NEW QUESTION 106
Refer to the exhibit.
What is the effect of this configuration?
- A. The switch port remains administratively down until the interface is connected to another switch
- B. The switch port remains down until it is configured to trust or untrust incoming packets
- C. Dynamic ARP inspection is disabled because the ARP ACL is missing
- D. The switch port interface trust state becomes untrusted
Answer: D
Explanation:
Explanation
Dynamic ARP inspection (DAI) is a security feature that validates ARP packets in a network. It intercepts, logs, and discards ARP packets with invalid IP-to-MAC address bindings. This capability protects the network from certain man-in-the-middle attacks. After enabling DAI, all ports become untrusted ports.
NEW QUESTION 107
Refer to the exhibit. Which configuration for RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 108
Refer to the exhibit.
What does router R1 use as its OSPF router-ID?
- A. 172.16.15.10
- B. 10.10.10.20
- C. 192.168.0.1
- D. 10.10.1.10
Answer: A
NEW QUESTION 109
Refer to the exhibit.
An engineer deploys a topology in which R1 obtains its IP configuration from DHCP. If the switch and DHCP server configurations are complete and correct. Which two sets of commands must be configured on R1 and R2 to complete the task? (Choose two)
- A. R2(config)# interface gi0/0
R2(config-if)#ip helper-address 198.51.100.100 - B. R1(config)# interface fa0/0
R1(config-if)#ip address dhcp
R1(config-if)# no shutsown - C. R2(config)# interface gi0/0
R2(config-if)#ip address dhcp - D. R1(config)# interface fa0/0
R1(config-if)#ip helper-address 198.51.100.100 - E. R1(config)# interface fa0/0
R1(config-if)#ip helper-address 192.0.2.2
Answer: A,B
NEW QUESTION 110
Refer to the exhibit.
What two conclusions should be made about this configuration? (Choose two )
- A. The spanning-tree mode is PVST+
- B. The spanning-tree mode is Rapid PVST+
- C. This is a root bridge
- D. The designated port is FastEthernet 2/1
- E. The root port is FastEthernet 2/1
Answer: B,E
NEW QUESTION 111
Which device allows users to connect to the network using a single or double radio?
- A. access point
- B. firewall
- C. switch
- D. wireless controller
Answer: A
NEW QUESTION 112
Which type of attack can be mitigated by dynamic ARP inspection?
- A. malware
- B. DDoS
- C. man-in-the-middle
- D. worm
Answer: C
NEW QUESTION 113
Refer to the exhibit.
An access list is required to permit traffic from any host on interface G0/0 and deny traffic from interface G/0/1. Which access list must be applied?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
NEW QUESTION 114
You have configured a router with an OSPF router ID, but its IP address still reflects the physical interface.
Which action can you take to correct the problem in the least disruptive way?
- A. Reload the OSPF process
- B. Reload the router
- C. Specify a loopback address
- D. Save the router configuration
Answer: C
NEW QUESTION 115
Which two commands correctly verify whether port security has been configured on port FastEthernet 0/12 on a switch? (choose two)
- A. SW1#show swithport port-security interface FastEthernet 0/12
- B. SW1# show swithport port-secure interface FastEthernet 0/12
- C. SW1# show port-secure interface FastEthernet 0/12
- D. SW1#show running-config
- E. SW1#show port-security interface FastEthernet 0/12
Answer: D,E
NEW QUESTION 116
The SW1 interface g0/1 is in the down/down state. Which two configurations are valid reasons for the interface condition? (Choose two.)
- A. There is a protocol mismatch
- B. The interface is error-disabled
- C. There is a duplex mismatch
- D. There is a speed mismatch
- E. The interface is shut down
Answer: B,E
Explanation:
Section: Network Access
Explanation/Reference:
NEW QUESTION 117
Refer to the exhibit. With which metric was the route to host 172.16.0.202 learned?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 118
Which JSON data type is an unordered set of attribute- value pairs?
- A. object
- B. string
- C. array
- D. Boolean
Answer: A
NEW QUESTION 119
An engineer must configure a/30 subnet between two routers. Which usable IP address and subnet mask combination meets this criteria?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
NEW QUESTION 120
Which two server types are used to support DNS lookup (choose two)
- A. authoritative name sever
- B. web server
- C. ESX host
- D. name resolver
- E. file transfer server
Answer: A,D
NEW QUESTION 121
......
Network Fundamentals Explained!
First things first, you will be expected to explain the role and significance of network components. This topic will also require you to compare cabling types and physical interface, compare UDP and TCP, configure IPv6 prefix and addressing, explain wireless principles, describe the fundamentals of virtualization, and describe the concepts of switching among the rest.
200-301 Dumps - Pass Your Certification Exam: https://www.free4dump.com/200-301-braindumps-torrent.html
Latest Real Cisco 200-301 Exam Dumps Questions: https://drive.google.com/open?id=1rzSAmX8WZ3IB2Jfp_WYN0Y5-HJiaMIRX