Latest [Aug 26, 2022] PD1-001 Exam Dumps - Valid and Updated Dumps
Free Sales Ending Soon - 100% Valid PD1-001 Exam Dumps with 861 Questions
NEW QUESTION 20
Which of the following should a technicians FIRST step be if a received fax has dark background?
- A. Check the media in the local machine.
- B. Produce a test print on the local machine.
- C. Check the operation of the remote machine.
- D. Test the telephone line quality.
Answer: B
NEW QUESTION 21
Toner is fused/fixed to the media by the use of:
- A. heat and pressure.
- B. a charge roller.
- C. a transfer roller.
- D. electrostatic charges.
Answer: A
NEW QUESTION 22
Which of the following processes is used to remove residual toner from the photoconductor?
- A. Cleaning
- B. Development
- C. Charging
- D. Erasing
Answer: A
NEW QUESTION 23
Which of the following describes the function of lamps located inside the fuser?
- A. Removes residual charges
- B. Charges the pressure roller
- C. Removes excess toner
- D. Generates heat
Answer: D
NEW QUESTION 24
Which of the following is MOST likely to be used to detect the presence of paper in the ADF?
- A. Clutch
- B. Solenoid
- C. Sensor
- D. Relay
Answer: C
NEW QUESTION 25
Which of the following is MOST likely to require a firmware upgrade?
- A. Installing an updated printer driver
- B. Changing the IP address and subnet mask
- C. Adding two new media sizes to the control panel
- D. Adding 256MB of RAM
Answer: C
NEW QUESTION 26
A user reports that their device is printing slower than normal. Which of the following would MOST likely resolve the issue?
- A. Adjust the color balance and registration.
- B. Replace the toner cartridges.
- C. Install a different driver.
- D. Verify the media type settings.
Answer: D
NEW QUESTION 27
On a digital printer utilizing a negative main charge, which of the following image quality problems would be expected if the laser unit was not functioning?
- A. Gray background
- B. Black image
- C. Poor focus
- D. Blank image
Answer: D
NEW QUESTION 28
A technician has just finished servicing a device at a clients location; the device has been tested for full functionality and is working properly. Which of the following should the technician do next before leaving the clients location?
- A. Use the clients phone to notify the service center that the service call is complete.
- B. Cal the next service call and give them an estimated arrival time.
- C. Restock any used components that were used from the vehicle inventory.
- D. Inform the client that the device is working properly and answer any questions.
Answer: D
NEW QUESTION 29
A technician is onsite working on an MFD and calls technical support for assistance. The technical support asks the technician for the device details. Which of the following would be the BEST response?
- A. Reply that it is some sort of printer or scanner on a shelf in the clients mail room.
- B. Reply with the manufacturers name, model number and serial number.
- C. Reply that the fax is not working and that you need help to get it running again.
- D. Reply with the units asset tag number, model and a description of the failure.
Answer: B
NEW QUESTION 30
Which of the following should a technician consider before replacing or repairing a fuser on a laser printer?
- A. Allow the fuser to cool down for an appropriate period of time.
- B. Make sure to open to front cover and remove the toner cartridge.
- C. Allow the laser diode to stop to turning.
- D. Ensure the charge applied to the drum has dissipated.
Answer: A
NEW QUESTION 31
Which of the following would be responsible for the network device printing random characters on the print jobs?
- A. The toner is not properly installed.
- B. The driver is corrupted.
- C. The photoconductor is damaged.
- D. The paper tray is empty.
Answer: B
NEW QUESTION 32
At which of the following points during the print process is the image made permanent?
- A. Fusing
- B. Writing
- C. Transfer
- D. Developing
Answer: A
NEW QUESTION 33
When a customer can print a test page from the driver properties page, which of the following would be true?
- A. The firmware is correctly configured.
- B. All prints will come out correctly.
- C. The printer can use all the options set on the driver.
- D. The print driver is loaded correctly.
Answer: D
NEW QUESTION 34
Which of the following stages in the laser print process attracts toner to the latent image on the photoconductor?
- A. Development
- B. Writing
- C. Transfer
- D. Fusing
Answer: A
NEW QUESTION 35
Which of the following printer driver settings must be selected to automatically print on both sides of the page?
- A. Duplex
- B. Scaling
- C. Col ation
- D. RAW
Answer: A
NEW QUESTION 36
The range of color that a color printer can produce is called its:
- A. perception.
- B. saturation.
- C. bit depth.
- D. gamut.
Answer: D
NEW QUESTION 37
An ink dispersion printer will not print a certain color. The technician observes the device turns on normally. The technician narrows down the issue to the ink supply, print head or purge unit. Which of the following troubleshooting methodology steps is being used in this scenario?
- A. Test or analyze
- B. Implement solution
- C. Document the solution
- D. Isolation
Answer: D
NEW QUESTION 38
The user in a small company mentions the output of the color printer does not exactly match the image on the PC screen. Which of the following is the BEST response to provide to the user?
- A. Explain that CMYK can produce superior output when compared to RGB.
- B. Explain that the color models used by the PC monitor and printer are not the same.
- C. Explain why the color on the printed page is not as important as the color on the PC monitor.
- D. Explain why the PC monitor and the printer should be from the same manufacturer.
Answer: B
NEW QUESTION 39
A dirty laser unit window can cause:
- A. ghosting on the prints.
- B. double-image prints.
- C. dark streaks on the prints.
- D. light streaks on the prints.
Answer: D
NEW QUESTION 40
During which of the following processes is the latent image applied to the photoconductor?
- A. Transfer
- B. Fusing
- C. Writing
- D. Developing
Answer: C
NEW QUESTION 41
......
PD1-001 Exam Dumps - 100% Marks In PD1-001 Exam: https://www.free4dump.com/PD1-001-braindumps-torrent.html