[Mar 05, 2022] Verified C_IBP_2108 dumps and 82 unique questions
C_IBP_2108 Dumps for Pass Guaranteed - Pass C_IBP_2108 Exam 2022
C_IBP_2108 Exam Certification Details:
| Sample Questions: | SAP C_IBP_2108 Exam Sample Question |
| Level: | Associate |
| Cut Score: | 64% |
| Languages: | English |
| Exam: | 80 questions |
NEW QUESTION 45
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.
- A. Business meaning, as defined in configuration
- B. Full unique name including the dimension and technical name
- C. Caption, as defined in configuration for the default name
- D. Changed member names that the user had created
Answer: A,B
NEW QUESTION 46
You need to create time periods for the time profile in a planning area. What should you be aware of when executing the Create Time Periods application job?
- A. The planning area with this time profile must be activated so that the application job can proceed.
- B. This application job cannot be scheduled for immediate start.
- C. This application job can be run for multiple time profiles at once.
- D. A time profile has to be activated so that the application job can proceed.
Answer: A
NEW QUESTION 47
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Detailed statistical analysis of demand data using predictive analytics tools
- B. Embedded, on-the-fly demand analytics
- C. Demand sensing of demand data using the supply chain algorithm library
- D. Demand sensing of demand data using predictive analytics tools
- E. Detailed statistical analysis of demand data using the supply chain algorithm library
Answer: A,B,C
NEW QUESTION 48
What setting is mandatory in the Manage Lifecycle Planning app when introducing a new product?
- A. Define which phase-in and phase-out profiles can be used within Lifecycle Planning
- B. Define which is the attribute ID for the Lifecycle profiles
- C. Define at least one attribute of the planning area which represents the Product ID
- D. Define which key figure can be used as sales history for new products
Answer: D
NEW QUESTION 49
Where can we see the results of Time Series analysis in SAP IBP?
- A. Time Series Property Attribute in Customer
- B. Time Series Property Attribute in Customer Source
- C. Time Series Property Attribute in Customer Product
- D. Time Series Property Attribute in Product
Answer: D
NEW QUESTION 50
Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.
- A. Each step depicted in the template can have tasks associated with it.
- B. All process templates are assigned to dashboards.
- C. The number of steps in a process template is the same for all implementations.
- D. New instances of templates allow for re-use of the same processes again.
Answer: A,D
NEW QUESTION 51
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question.
- A. Configure at most two input key figures on the same planning level in a key figure calculation.
- B. Assign the compound master data type and its component master data types.
- C. Configure at least one calculated key figure for the planning area.
- D. Specify a planning horizon in the planning area for each level of the assigned time profile.
Answer: B,D
NEW QUESTION 52
Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? Note: There are 3 correct Answers to this question.
- A. Rough-cut supply planning
- B. Executive review
- C. Consensus demand planning
- D. Finite resource capacities planning
- E. Demand-driven materials requirement planning
Answer: A,B,C
NEW QUESTION 53
Which library is used by the forecasting engine for the demand sensing algorithm?
- A. Predictive analytics library
- B. Heuristics library
- C. Demand library
- D. Supply chain algorithm library
Answer: D
NEW QUESTION 54
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct Answers to this question.
- A. It belongs to a simple or compound master data type.
- B. It should be a non-key attribute of the master data type.
- C. Its data type is INTEGER and its length has been specified.
- D. The length of the attribute needs to be 18 digits.
Answer: A,B
NEW QUESTION 55
Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct Answers to this question.
- A. The total number of attributes that can use subtotals in the planning view can be restricted.
- B. Only attribute-based totals can be added to the planning view.
- C. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
- D. The total value can be added before or after the selected attribute.
Answer: A,D
NEW QUESTION 56
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.
- A. Capacity leveling will be possible for production and storage resources.
- B. Enough demands can be pulled forward and pull production will occur.
- C. Excess stock can be generated and will need to be staged in an overflow warehouse.
- D. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
Answer: B,D
NEW QUESTION 57
What type of key figure requires a planning level to have all attributes as roots?
- A. The attribute transformation key figure, such as PERIODID1
- B. The conversion key figure, such as exchange rate
- C. The special key figure marked as an aggregate key figure
- D. The time independent key figure, such as FCSTMAPE
Answer: C
NEW QUESTION 58
What is a prerequisite for modeling outsourced manufacturers with production capacity?
- A. Model target inventory and stocks at the outsourced location.
- B. Model production costs for internal and external production resources to model priority.
- C. Ensure that multiple modes of transportation are set up.
- D. Use production lead times and offsets to manage components at the outsourced location.
Answer: B
NEW QUESTION 59
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Periods are identified by an alphanumeric prefix and profiles by an integer.
- B. Both periods and profiles are identified by an integer.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Periods are identified by a start and end date and profiles by an integer.
Answer: D
NEW QUESTION 60
Which one of the following values can you use in disaggregation expressions?
- A. If (Attribute)=0
- B. KF1 (Stored) + Helper KF
- C. KF1 (Stored) + KF2 (Stored) + Attribute
- D. KF1 (Calculated) + Attribute
Answer: A
NEW QUESTION 61
While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.
- A. Target inventory violation cost should be less than max inventory violation cost.
- B. Target inventory violation cost should be greater than discount for demand lateness.
- C. Target inventory violation cost should be greater than inventory holding cost rate.
- D. Target inventory violation cost should be less than transportation cost rate.
Answer: C,D
NEW QUESTION 62
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. Select Protect Active Worksheet in the About section of SAP IBP tab
- B. IBP -> Lock Selected cells in IBP Formatting Sheet tab
- C. By restricting data input in the Key Figure Configuration app
- D. IBP -> Data Validation in IBP Formatting Sheet tab
Answer: C
NEW QUESTION 63
When can filter blocks appear in calculations? Note: There are 2 correct Answers to this question.
- A. When using IFISNULL statements in the formula
- B. When modeling attribute as a key figure
- C. When modeling cross-period calculations
- D. When modeling attribute transformations
Answer: C,D
NEW QUESTION 64
You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question.
- A. Enter transportation lead times.
- B. Create product substitutions.
- C. Set minimum and maximum lot sizes.
- D. Model adjusted transport receipts.
Answer: A,D
NEW QUESTION 65
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note:
There are 3 correct Answers to this question.
- A. You can only apply one value-based filter per planning view.
- B. These filters can be used together with attribute totals in the same planning view.
- C. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- D. These filters are always applied based on the values stored in the database.
- E. You can add (or delete) planning objects to a planning view after these filters are applied.
Answer: A,C,D
NEW QUESTION 66
......
Latest 100% Passing Guarantee - Brilliant C_IBP_2108 Exam Questions PDF: https://www.free4dump.com/C_IBP_2108-braindumps-torrent.html