Network Appliance NS0-173 Certification Exam Dumps with 62 Practice Test Questions
New NS0-173 Exam Dumps with High Passing Rate
NEW QUESTION 36
Which command would a FlexPod administrator use to determine whether an FC initiator has logged on to the fabric?
- A. MDS9148>show fcc
- B. MDS9148>show fcfwd
- C. MDS9148>show flogi database
- D. MDS9148>show fcdomain
Answer: C
NEW QUESTION 37
A customer is investigating options for implementing a FlexPod Datacenter solution that is using vSphere 6.x.
In this scenario, which two resources would be important to review? (Choose two.)
- A. VMware vSAN documentation
- B. Cisco Validated Design documents
- C. NetApp Technical Report
- D. Cisco Cloud Center documentation
Answer: B,C
NEW QUESTION 38
A customer with a FlexPod Datacenter design that uses a 4-node FAS8200 for storage wants to add a new workload that requires high performance. The customer needs to nondisruptively move some workloads from the existing FAS system to the new storage.
Which storage system would satisfy the requirements?
- A. E2700
- B. EF570
- C. FAS2700
- D. AFF A300
Answer: B
NEW QUESTION 39
Your customer wants assurances that all aspects of FlexPod are highly available.
Which statement is correct in this scenario?
- A. Cisco UCS Manager automatically copies its configuration data to a remote data store.
- B. Cisco UCS Manager contains multiple UCS domains.
- C. Cisco UCS Manager maintains a replica of configuration information.
- D. Cisco UCS Manager uses active-active architecture.
Answer: C
Explanation:
The management and data plane of Cisco UCS is designed for high availability and redundant access layer fabric interconnects. In addition, Cisco UCS supports existing high availability and disaster recovery solutions for the data center, such as data replication and application-level clustering technologies.
NEW QUESTION 40
A customer has several existing standalone Cisco UCS C-Series servers that they would like to repurpose and add to their FlexPod Datacenter solution.
Which action should the customer perform on these servers before using UCS Manager?
- A. Reset the CIMC to the factory settings on each server.
- B. Remove the hard disks on each server.
- C. Reboot the CIMC on each server.
- D. Zero-out the FlexFlash cards on each server.
Answer: A
Explanation:
On rare occasions, such as an issue with the current running firmware, troubleshooting a server may require you to reset the CIMC to the factory default. When this happens, all user-configurable settings are reset. This procedure is not part of the normal server maintenance. After you reset the CIMC, you are logged off and must log in again. You may also lose connectivity and may need to reconfigure the network settings.
NEW QUESTION 41
You are asked to design a FlexPod solution that meets the minimum requirements and includes Application Centric Infrastructure (ACI).
Which three Cisco components are required in this scenario? (Choose three.)
- A. Cisco Nexus 2000 Series Fabric Extender
- B. Cisco Nexus 3000 Series switches
- C. Cisco UCS Series Fabric Interconnects
- D. Cisco UCS B-Series servers
- E. Cisco Nexus 9000 Series switches
Answer: C,D,E
NEW QUESTION 42
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. three
- B. four
- C. one
- D. two
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 43
A customer is planning to use a pair of MDS switches in a FlexPod design to host a few SAN workloads.
In this scenario, which two features should be enabled on the MDS switches for a successful configuration? (Choose two.)
- A. NPV
- B. port-channel-trunk
- C. NPIV
- D. fport-channel-trunk
Answer: B,C
NEW QUESTION 44
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. SAML
- B. RDP
- C. SSH
- D. Telnet
Answer: C,D
NEW QUESTION 45
A customer wants to deploy FlexPod for a VDI solution with 10,000 users, each with 10 GB of storage allocated.
To support this configuration, which three components must be sized? (Choose three.)
- A. the Cisco UCS servers
- B. the 1GbE ports from user systems
- C. the optical cable length
- D. the NetApp AFF storage
- E. the fabric interconnect ports
Answer: A,B,E
NEW QUESTION 46
You want to deploy a FlexPod Datacenter solution based on the minimum hardware requirements.
Which three components must be deployed in highly available pairs to accomplish this task? (Choose three.)
- A. NetApp FAS Storage Controllers
- B. Cisco APICs
- C. Cisco UCS Fabric Interconnects
- D. Cisco UCS 5108 Chassis
- E. Cisco USC Nexus Switches
Answer: A,C,D
NEW QUESTION 47
A service provider is designing a FlexPod configuration to host multiple customers in a hybrid cloud environment, where IP address-range conflicts might arise on the shared storage.
Which NetApp feature should be enabled to prevent these conflicts?
- A. SVMs
- B. IPspaces
- C. failover groups
- D. broadcast domains
Answer: B
NEW QUESTION 48
Click the Exhibit button.
The total number of servers that a Cisco UCS Mini chassis supports is set to a maximum of how many hosts as shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 49
A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available.
Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.)
- A. NetApp
- B. Red Hat
- C. Cisco
- D. Microsoft
- E. VMware
Answer: A,B,C
NEW QUESTION 50
When FCoE is configured in a FlexPod environment, which step is required?
- A. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.
- B. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.
- C. Create a VSAN to support FCoE for the FC uplink.
- D. Create a VSAN within service profiles.
Answer: B
NEW QUESTION 51
Click the Exhibit button.
You have designed a FlexPod Express solution that uses a NetApp ONTAP controller, Cisco UCS C-Series servers, and Cisco Nexus 3000 Series switches, as shown in the exhibit. Which three storage protocols are supported in this design? (Choose three.)
- A. FC
- B. iSCSI
- C. NFS
- D. FCoE
- E. SMB
Answer: A,B,C
NEW QUESTION 52
A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)
- A. MTU configuration
- B. ALUA settings
- C. igroup configuration
- D. FC zoning
- E. FC portsets
Answer: A,C,E
NEW QUESTION 53
......
Get NS0-173 Braindumps & NS0-173 Real Exam Questions: https://www.free4dump.com/NS0-173-braindumps-torrent.html