[Nov-2021] HPE6-A79 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
Pass HP HPE6-A79 Exam With Practice Test Questions Dumps Bundle
HP HPE6-A79 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 21
Refer to the exhibit.
A network administrator wants to allow contractors to access the WLAN named EmployeesNet. In order to restrict network access, the network administrator wants to assign this category of users to the contractor user role. To do this, the network administrator configures ClearPass in a way that it returns the Aruba-User-Role with the contractor value.
When testing the solution, the network administrator receives the wrong role.
What should the network administrator do to assign the contractor role to contractor users without affecting any other role assignment?
- A. Check the Download role from the CPPM option in the AAA profile.
- B. Create Contractor firewall role in the M.
- C. Set contractor as the default role in the AAA profile.
- D. Create server deviation rules in the server group.
Answer: A
NEW QUESTION 22
Refer to the exhibit.
A network administrator adds a Mobility Controller (MC) in the /mm level and notices that the device does not show up in the managed networks hierarchy. The network administrator accesses the CLI. executes the show switches command, and obtains the output shown in the exhibit.
What is the reason that the MC does not appear as a managed device in the hierarchy?
- A. The network administrator has not moved the device into a group yet.
- B. The digital certificate of the MC is not trusted by the MM.
- C. The IP address of the MC does not match the one that was defined in the MM.
- D. The network administrator added the device using the wrong Pre-Shared Key (PSK).
Answer: C
NEW QUESTION 23
Refer to the exhibit.
A network administrator completes the initial configuration dialog of the Mobility Controllers (MCs) and they join the Mobility Master (MM) for the first time. After the MM-MC association process, network administrator only creates AP groups, VAPs, and roles. Next, the network administrator proceeds with the configuration of the policies and creates the policy shown in the exhibit.
Which additional steps must be done to make sure this configuration takes effect over the contractor users?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION 24
Refer to the exhibit.
A network administrator has recently enabled WMM on the VAP's SSID profile and enabled UCC Skype4B ALG at the Mobility Master level. During testing, some voice and video conference calls were made, and it was concluded that the call quality has dramatically improved. However, end to end information isn't displayed in the call's details. Also, Skype4B app-sharing's performance is poor at times.
What must the administrator do next in order to enable end to end call visibility and QoS correction to app-sharing service?
- A. Increase the app-sharing DSCP value in the Skype4B ALG profile.
- B. Deploy the SDN API Software in the Skype4B Solution and point to the MM.
- C. Enable UCC monitoring on the "default-controller' mgmt.-server profile.
- D. Enable the App-sharing ALG profile at both MM and MD hierarchy levels.
Answer: D
NEW QUESTION 25
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 3
A network administrator wants to allow contractors to access the corporate WLAN named EmployeesNet with the contractor role in VLAN 40. When users connect, they do not seem to get an IP address. After some verification checks, the network administrator confirms the DHCP server (10.254.1.21) is reachable from the Mobility Controller (MC) and obtains the outputs shown in the exhibits.
What should the network administrator do next to troubleshoot this problem?
- A. Configure the DHCP helper address.
- B. Confirm there is an IP pool for VLAN 40.
- C. Permit UDP67 to the contractor role.
- D. Remove the IP address in VLAN 40.
Answer: C
NEW QUESTION 26
A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.
What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?
- A. Map the four physical ports to port channel 0.
- B. Disable spanning tree and allocate unique VLANs to each port.
- C. Manually set 10Gbps speeds on all ports.
- D. Make all ports trunk interfaces and permit data VLANs.
- E. Configure the same MSTP region that the switches have.
Answer: C
NEW QUESTION 27
A network administrator wants to receive a warning level alarm every time the noise floor rises above -82 dBm on any of the AP radios.
Which alarm definition must the network administrator create to accomplish this?
Answer:
Explanation:
NEW QUESTION 28
A software development company has 764 employees who work from home. The company also has small offices located in different cities throughout the world. During working hours, they use RAPs to connect to a datacenter to upload software code as well as interact with databases.
In the past two month, cabling issues have occurred connection to the 7240XM Mobility Controller (MC) that runs ArubaOS 8 and terminates the RAPs. These RAPs disconnect, affecting the users connected to the RAPs. This also causes problems with code uploads and database synchronizations. Therefore, the company decides to add a second 7240XM controller for redundancy.
How should the network administrator deploy both controllers in order to provide the redundancy while preventing failover events from disconnecting users?
- A. Connect both controllers with common VLANs. and create an L2-connected cluster using public addresses in the internet VLAN.
- B. Connect both controllers with common VLANs. and configure LMS/BLMS values equal to public addresses in the internet VLAN.
- C. Connect both controllers with different VLANs. and create an L2-connected cluster using public addresses in the internet VLAN.
- D. Connect both controllers with common VLANs. and create an HA fast failover group with public addresses in the internet VLAN.
Answer: D
NEW QUESTION 29
A joint venture between two companies results in a fully functional WLAN Aruba solution. The network administrator uses the following script to integrate the WLAN solution with two radius servers, radius1 and radius2.
While all users authenticate with [email protected] type of credentials, radius1 has user accounts with the domain name portion.
Which additional configuration is required to authenticate corp1.com users with radius1 and corp2 users with radius2?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION 30
An Aruba Mobility Master (MM) - Mobility Controller (MC) solution is connected to a wired network that is ready to prioritize DSCP marked traffic. A group of WMM-enabled clients sends traffic marked at L2 only.
What must the network administrator do to map those markings to DSCP equivalent values when traffic is received by the APs?
- A. Enable WMM in the SSID profile.
- B. Enable traffic to be marked with session ACLs.
- C. Enable Skype4Business ALG Support.
- D. Enable WMM in the VAP profile.
Answer: D
NEW QUESTION 31
Refer to the exhibit
A network administrator deploys a standalone Mobility Controller (MC) and configures some VAPs within the CAMPUS AP group. The network administrator realizes that none of the VAPs are being broadcasted.
Based on the output shown in the exhibit, what should the network administrator do to solve this problem?
- A. Install MC-VA licenses, then install PEF licenses and enabled the PEF feature.
- B. Install MM licenses, then install PEF licenses and enable the PEF feature.
- C. Install MM licenses and install MC-VA licenses, then install RFP licenses.
- D. Install MC-VA licenses, then reprovision the APs.
Answer: C
NEW QUESTION 32
Refer to the exhibits.
A user reports slow connectivity to a network administrator when connecting to AP-Garden and suggests that there might be a problem with the WLAN. The user's device supports 802.11n in the 2.4 GHz band. The network administrator finds the user in the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
- A. 2.4Ghz band is currently congested, therefore a NIC upgrade to 802.11ac or higher is recommended so the user can move to 5Ghz.
- B. Channel usage is high and though this device has high speed the overall client rate is low on AP-Garden. there could be a few clients monopolizing the airtime on both bands at low speeds.
- C. 365s are low cost outdoor APs recommended for coverage design only. AP-Garden currently has more clients than recommended and is getting congested.
- D. User's SNR value over time is lower than recommended, therefore he should either get closer to the Access Point or increase the transmit power.
Answer: C
NEW QUESTION 33
An organization owns a fully functional multi-controller Aruba network with a Virtual Mobility Master (VMM) in VLAN20. They have asked a network consultant to deploy a redundant MM on a different server. The solution must offer the lowest convergence time and require no human interaction in case of failure.
The servers host other virtual machines and are connected to different switches that implement ACLs to protect them. The organization grants the network consultant access to the servers only, and appoints a network administrator to assist with the deployment.
What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)
- A. Configure an ACL entry that permits IP protocol 50, UDP port 500, and multicast IP 224.0.0.18.
- B. Configure an ACL entry that permits UDP 500, TCP 4500, and multicast IP 224.0.0.5.
- C. Allocate VLAN20 to the second server, and permit routing between them, then reserve one IP address for the second MM and another IP address for its gateway.
- D. Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another for the VIP.
- E. Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another IP address for its gateway.
Answer: B,E
NEW QUESTION 34
Refer to the exhibit.
A network administrator has a Mobility Master (MM) Mobility Controller (MC) architecture along with the MC in the DMZ for terminating RAPs. The network firewall has been provisioned to allow access to the MC in the DMZ for both UDP 500 and 4500. Then he proceeds to provision an AP as shown in the exhibit.
Which additional configuration steps must the administrator to assure RAPs successfully contact the MC? (Choose two.)
- A. Add the RAP1 entry in the CPsec whitelist at the MM level.
- B. Create the RAP1 account in the InternalDB of the MM.
- C. Create the RAP1 account in the InternalDB of the MC.
- D. Create an IP local pool and PSK at the device node level.
- E. Create an IP local pool and PSK at the /mm/mynode level.
Answer: A,E
NEW QUESTION 35
Users run encrypted Skype for Business traffic with no WMM support over an Aruba Mobility Master (MM) - Mobility Controller (MC) based network. When voice, video, and application sharing traffic arrive at the wired side of the network, all the flows look alike due to the lack of L2 and L3 markings How can the network administrator identify these flows and mark QoS accordingly?
- A. Confirm the MM is the Openflow controller of the MCs and Openflow is enabled in VAP and the firewall roles. Then integrate the MM with the Skype4Business SDN API. and enable the Skype4Business ALG in the UCC profiles.
- B. Use a media firewall policy that match these three flows, and use permit and TOS actions with 56, 40, and 34 values for voice, video, and application sharing, respectively Then enable the Skype4Business ALG in the UCC profiles.
- C. Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and the firewall roles. Then enable the Skype4Business ALG in the UCC profiles.
- D. Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and the firewall roles. Then enable WMM in a VAP profile.
Answer: A
NEW QUESTION 36
Refer to the exhibit.
A network engineer deploys two different DHCP pools in an Instant AP (IAP) cluster for WLANs that will have connectivity to a remote site using Aruba IPSec.
Based on the output shown in the exhibit, which IAP-VPN DHCP modes are being used?
- A. local L3 and distributed L2
- B. local L3 and centralized L2
- C. distributed L3 and centralized L2
- D. centralized L3 and distributed L2
Answer: D
NEW QUESTION 37
Refer to the exhibit.
Based on the output shown in the exhibit, with which Aruba devices has Access-1 established tunnels?
- A. a single standalone MC
- B. a pair of standalone MCs
- C. a pair of switches running VXLAN
- D. a pair of MCs within a L3 cluster
Answer: D
NEW QUESTION 38
Refer to the exhibit.
Based on the output shown in the exhibit, which wireless connection phase has just completed?
- A. MAC Authentication and 4-way handshake
- B. 802.11 enhanced open association
- C. L2 authentication and encryption
- D. L3 authentication and encryption
Answer: D
NEW QUESTION 39
......
2021 Valid HPE6-A79 test answers & HP Exam PDF: https://www.free4dump.com/HPE6-A79-braindumps-torrent.html