Pass Citrix Deploy and Manage Citrix ADC 13 with Traffic Management Exam in First Attempt Guaranteed Updated Dump from Free4Dump!
Pass 1Y0-241 Exam with 114 Questions - Verified By Free4Dump
Official Study Guide
The Citrix 1Y0-241 official study guide should top your list if you are looking for one of the best materials to break into the IT industry easily. This guide can be found on the Citrix official website and covers vital exam details to help learners understand what they will be expected to know to attain this certificate. Because the Citrix 1Y0-214 test is focused on candidates’ ability to deploy the Citrix ADC 13 solutions, they should showcase superb networking skills and the ability to integrate different solutions with the Citrix ADC environments. And this is one of the biggest roles played by this study guide. You will find factual exam details, review questions, and additional information about critical aspects such as the scheduling protocols.
Citrix 1Y0-241 exam is an essential certification for IT professionals looking to validate their skills in deploying and managing Citrix ADC with traffic management. By earning this certification, you can demonstrate your expertise in Citrix ADC deployment, administration, and optimization, and open up new opportunities in the IT industry. With careful preparation and study, you can pass 1Y0-241 exam and take the first step towards a rewarding career in Citrix ADC management.
NEW QUESTION # 40
Scenario: A Citrix Administrator would like to grant access to a Junior Citrix Administrator on the Citrix ADC.
The administrator would like to grant full access to everything except the following:
Shell User configuration
Partition configuration
Which preexisting command policy would meet the needs of this scenario?
- A. Network
- B. Operator
- C. Sysadmin
- D. Superuser
Answer: C
NEW QUESTION # 41
Scenario: A Citrix Administrator suspects an attack on a load-balancing vServer (IP address 192.168.100.25).
The administrator needs to restrict access to this vServer for 10 minutes.
Which Access Control List (ACL) will accomplish this?
- A. add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600000
- B. add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600
- C. add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600000
- D. add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600
Answer: D
NEW QUESTION # 42
Which Citrix ADC platform offers an out-of-the-box multi-tenant solution?
- A. CPX
- B. MPX
- C. VPX
- D. SDX
Answer: D
NEW QUESTION # 43
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?
- A. SSL bridge
- B. SSL profile
- C. SSL multiplexing
- D. SSL policy
- E. SSL policy
Answer: B
NEW QUESTION # 44
Which two items must be true for a client to connect to an SSL offload vServer without any SSL errors? (Choose two.)
- A. The root certificate is installed on the Citrix ADC.
- B. The root certificate is installed on the client s device.
- C. The server certificate is from a private certificate authority (CA).
- D. The server certificate is bound to the load-balancing vServer.
Answer: A,B
NEW QUESTION # 45
Scenario: A Citrix Administrator configured an authentication, authorization, and auditing (AAA) policy to allow users access through the Citrix ADC. The administrator bound the policy to a specific vServer.
Which policy expression will allow all users access through the vServer?
- A. ns_false
- B. ns_true
- C. true
- D. false
Answer: B
Explanation:
Tricky one, this is for 13.1 and classic still is mandatory for AAA until 2023 (with exceptions on Traffic policy) https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/policies-and-expressions/introduction-to-policies-and-exp/advanced-policy-infrastructure.html
NEW QUESTION # 46
set gslb vServer-GSLB-1-MIR ENABLED
What will the Citrix ADC appliance send when the above command is executed?
- A. Only the best GSLB service in the response
- B. The Local GSLB service as the first record in the response and adds the remaining active services as additional records
- C. The best global server load balancing (GSLB) service as the first record in the response, and the remaining active services as additional records
- D. The Remote GSLB service as the first record in the response and adds the remaining active services as additional records
Answer: C
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/global-server-load-balancing/how-to/protect-setup-against-failure.html
"if you enable multiple IP responses (MIR), the Citrix ADC appliance sends the best GSLB service as the first record in the response and adds the remaining active services as extra records. "
NEW QUESTION # 47
A Citrix Administrator receives user complaints about latency while accessing an application that is load balanced on the Citrix ADC.
Which tool can the administrator use to gather information regarding response time, client network latency, and server-side processing time?
- A. HDX Insight
- B. WAN Insight
- C. Citrix Application Delivery Management (ADM)
- D. Security Insight
Answer: C
NEW QUESTION # 48
Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize the responses? (Choose two.)
- A. SSL protocol for the vServer
- B. HTTP protocol for the vServer
- C. HTTP protocol for the services
- D. SSL protocol for the services
- E. SSL bridge protocol for the services
- F. SSL bridge protocol for the vServer
Answer: A,D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/how-to-articles/end-to-end-encrypt.html
NEW QUESTION # 49
Scenario: A Citrix Administrator created and bound multiple content switching policies. During testing, attempts to access https://cs.mycompany.com resulted in the error message below:
HTTP 503 Service Unavailable
In a Citrix ADC configuration, what can the administrator do to fix the error?
- A. Enable the content switching feature
- B. Check the priorities of the existing policies
- C. Disable the spillover redirect URL.
- D. Bind a certificate
Answer: B
NEW QUESTION # 50
Scenario: A Citrix Administrator suspects an attack on a load-balancing vServer (IP address 192.168.100.25).
The administrator needs to restrict access to this vServer for 10 minutes.
Which Access Control List (ACL) will accomplish this?
- A. add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600000
- B. add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600
- C. add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600000
- D. add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600
Answer: D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/networking/access-control-lists-acls/extended-acls-and-extended-acl6s.html By binding a multiple SAN certificate, we only need to adapt the DNS entries of the websites to point to the same IP (1 IP with 3 DNS) and we will be able to forward the requests to any backend server since all of them are serving the same content.
NEW QUESTION # 51
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode.
The current load-balancing setup on the Citrix ADC is:
One load-balancing vServer with one externally accessible VIP
One service created for each protocol type
One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers.
What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?
- A. Disable the load-balancing vServer.
- B. Unbind the correct server entity from the load-balancing vServer.
- C. Disable the backend service entity targeted for change.
- D. Disable the backend server entity targeted for change.
Answer: D
NEW QUESTION # 52
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Plug another 10G Citrix ADC port into the router.
- B. Add two more 10G Citrix ADC ports to the network and configure VLAN.
- C. Purchase another Citrix ADC MPX appliance.
- D. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
Answer: D
NEW QUESTION # 53
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP_ECV on port 99
- B. HTTP-ECV on port 80
- C. HTTP on port 99
- D. HTTP on port 80
Answer: A
Explanation:
destPort TCP or UDP port to which to send the probe. If the parameter is set to 0, the port number of the service to which the monitor is bound is considered the destination port. For a monitor of type USER, however, the destination port is the port number that is included in the HTTP request sent to the dispatcher. Does not apply to monitors of type PING.
NEW QUESTION # 54
In an SSL offload deployment, which policy will allow a Citrix Administrator to modify all URLs in the response body from "http://" to "https://"?
- A. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"https //\"" -pattern "http://"
> add rewrite policy Pol1 trueAct1 NOREWRITE - B. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"http://\"" -pattern "https://"
> add rewrite policy Pol1 trueAct1 NOREWRITE - C. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"https:\"" -pattern "http://"
> add rewrite policy Pol1 trueAct1 NOREWRITE - D. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"http:\"" -pattern "\https://\"
> add rewrite policy Pol1 trueAct1 NOREWRITE
Answer: C
NEW QUESTION # 55
In a global server load balancing (GSLB) active-active environment, the connection proxy is used as the site persistence method.
What is used to source the traffic when the connection is proxied?
- A. Virtual IP (VIP)
- B. Subnet IP (SNIP)
- C. Client source IP
- D. LDNS IP Address
Answer: C
NEW QUESTION # 56
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. CORRUPT_HTTP_HEADER
- B. REPLACE_HTTP_REQ
- C. REPLACE
- D. REPLACE_ALL
Answer: C
NEW QUESTION # 57
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. CORRUPT_HTTP_HEADER
- B. REPLACE_HTTP_REQ
- C. REPLACE
- D. REPLACE_ALL
Answer: C
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/rewrite/rewrite-action-policy-examples/example-mask-http-server-type.html
NEW QUESTION # 58
......
Penetration testers simulate 1Y0-241 exam: https://www.free4dump.com/1Y0-241-braindumps-torrent.html
Free Test Engine For Deploy and Manage Citrix ADC 13 with Traffic Management Certification Exams: https://drive.google.com/open?id=1AucuAC5_G8RBg4R_JfEwKgfB37UBa4n4