Verified 1z0-996-22 Dumps Q&As - 1z0-996-22 Test Engine with Correct Answers
Pass Your 1z0-996-22 Dumps as PDF Updated on 2022 With 72 Questions
NEW QUESTION 24
Which three statements are true about initial measurements, final measurements, and usage? (Choose three.)
- A. Usage is a synonym for bill determinants.
- B. A service point can have more than one initial measurement for the same period, but only one final measurement.
- C. The initial measurement data can be optionally stored in Raw format.
- D. Final measurements can be directly edited or updated by users or by automated processes as required.
- E. Usage is loaded in the application to generate final measurements.
Answer: B,D,E
NEW QUESTION 25
Using a base-supplied algorithm type, what is payment distribution priority typically determined by?
- A. Customer Class and Debt Age
- B. Service Agreement Type's Priority and Debt Age
- C. Payment Type + Debt Age
- D. Customer Class and Service Agreement Type
- E. Debt Age
Answer: A
NEW QUESTION 26
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. High/Low Check Validation
- B. Multiplier Check Validation
- C. Sum Check Validation
- D. Critical Validation
- E. Critical Validation, High/Low Check Validation, and Sum Check Validation
Answer: B
NEW QUESTION 27
When a customer has a specific price for a defined quantity which is different to other customers, where is this specific price for the related Bill Factor defined?
- A. Service Agreement - Contract Value
- B. Bill Factor Characteristic
- C. Bill Factor Value
- D. Calculation Rule
- E. Account Characteristic
Answer: A
NEW QUESTION 28
Which usage rule would be used to retrieve scalar measurements and convert the total from one unit of measure to another?
- A. Get Scalar Details and Math
- B. Get Scalar Details and Axis Conversion
- C. A custom set of usage rules must be written.
- D. Get Scalar Details and Apply Formula
Answer: B
NEW QUESTION 29
How many derived values can a final measurement have in addition to the primary measured value?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 30
What happens when a device's measuring components are reconfigured (a new measuring component will be read) at a service point?
- A. A device with a new configuration type is created. Moreover, a new installation event is created to 'install" (new device configuration).
- B. The original installation event is updated with the "removal" (expire old device configuration) and a new installation event is created to "install" (new device configuration).
- C. A new installation event is created to "install" (new device configuration).
- D. The original installation event is updated with the "removal" (expire old device configuration).
- E. A device with a new configuration type is created.
Answer: B
NEW QUESTION 31
A Service Order Orchestrator determines the steps required to complete the service.
As an example, based on the state of the service point, what does the Enable Service Orchestrator determine the actions for?
- A. Connect the Service Point; Install a Device; Turn on the Device
- B. Create a Device Configuration; Install a Device; Turn on the Device
- C. Connect the Service Point; Install a Device; Create a Usage Subscription
- D. Create a Service Point; Install a Device; Turn on the Device
Answer: D
NEW QUESTION 32
If a customer makes a payment for more than what is due for the account, which entity contains the logic for how this overpayment should be handled?
- A. Tender Type
- B. Installation Options
- C. Service Agreement Type
- D. Customer Class
- E. Pay Segment Type
Answer: B,C,D
NEW QUESTION 33
Which three are important Account concepts that must always be followed? (Choose three.)
- A. Every Account has a unique, system-assigned Account ID.
- B. Bills are produced for an account and are sent to the account persons.
- C. An Account can only reference one and only one person at one time.
- D. An Account references one or more persons.
- E. Accounts expire when there are no active contracts.
Answer: A,B,C
NEW QUESTION 34
Which business object performs critical validations whenever initial measurements are loaded?
- A. D1-IMDSeeder
- B. D1-IMDRetry
- C. D1-IMDPeriod
- D. D1-IMDPreVEE
- E. D1-GenericIMDMain
Answer: A
NEW QUESTION 35
Which two plug-in spots can call the rating functionality using base package-supplied algorithm types? (Choose two.)
- A. Bill Segment Type - Bill Segment Create
- B. Billable Charge Template
- C. Adjustment Type - Generate
- D. Adjustment Type - Adjustment FT Creation
- E. Bill Segment Type - Bill Segment FT Creation
Answer: D,E
NEW QUESTION 36
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- B. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
- C. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
- D. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
- E. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
Answer: A
NEW QUESTION 37
Which relationship must be established with an external system or a service provider before creating bill determinants?
- A. Usage Rule
- B. Usage Factor
- C. Usage Transaction
- D. Usage Subscription
Answer: D
NEW QUESTION 38
How many devices can be installed at a service point at an instance in time?
- A. up to three devices
- B. one for each service type
- C. one for each measuring component
- D. exactly one device
Answer: D
NEW QUESTION 39
Which option correctly describes the high-level process from loading measurements through calculating usage?
- A. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Update Initial Measurements - B. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Calculate Usage - C. 1. Load Initial Measurements
2. Validate, evaluate, and estimate Initial Measurements
3. Update Initial Measurements
4. Calculate Usage - D. 1. Load Initial Measurements
2. Verify, evaluate, and enter Initial Measurements
3. Create Final Measurements
4. Calculate Usage
Answer: D
NEW QUESTION 40
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control when a Financial Transaction is to be swept onto a bill.
- B. They control how the payoff balance is affected.
- C. They control if and how the General Ledger entries are created.
- D. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
- E. They control how the current balance is affected.
Answer: A,B,C
NEW QUESTION 41
Which two statements about usage subscription types are correct? (Choose two.)
- A. Usage subscription types define the valid service point types.
- B. Usage subscription types define the recipient of the usage.
- C. Usage subscription types define the main billing contact.
- D. Usage subscription types define the time zone.
Answer: A,D
NEW QUESTION 42
For a customer to receive a Subscription communication, what must they have?
- A. an active account contact preference
- B. an active address type preference
- C. an active person contact preference
- D. an active address contact preference
Answer: A
NEW QUESTION 43
How do you ensure that specific Validation, Editing, and Estimation (VEE) rules are applied to estimated measurements?
- A. by adding the VEE Group to the Device Configuration Type
- B. by adding the VEE Group as the Fallback VEE Group for the appropriate VEE role
- C. by adding the estimation rules to the Manual Override VEE Group to the Measuring Component Type
- D. by adding the VEE Group to the Device Type
Answer: C
NEW QUESTION 44
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. Four
- B. None
- C. Two
- D. One
- E. Three
Answer: D
NEW QUESTION 45
Which statement correctly describes the relation between a device and a measuring component?
- A. A device can have any combination of interval and/or scalar measuring components.
- B. A device configuration links a device only to interval channels.
- C. A device should have only one measuring component type.
- D. Two measuring components on the same device should have the same Units of Measure (UOM).
Answer: A
NEW QUESTION 46
When the source of a Financial Transaction is canceled, what does it result in?
- A. The source Financial Transaction status is changed to "Canceled".
- B. The source Financial Transaction is deleted.
- C. The source Financial Transaction is deleted and a new reversal Financial Transaction is created.
- D. No change occurs.
- E. A new reversal Financial Transaction is created.
Answer: C
NEW QUESTION 47
What determines an Account's Balance?
- A. the sum of all the balances recorded in the "Balance Due" field on each service agreement related to the account
- B. the logic defined in a plug-in spot on the Installations Option
- C. the amount recorded in the "Balance Due" field on an account
- D. the sum of all the Financial Transactions linked directly to the service agreements related to the account
- E. the sum of all the Financial Transactions linked directly to the account
Answer: E
NEW QUESTION 48
How many bill segment-related financial transactions do Payment Arrangements have?
- A. one
- B. unlimited
- C. none
- D. depends on the number of payments that are part of the payment arrangement
- E. depends on the number of bills that will contain the customer's payment arrangement details
Answer: A
Explanation:
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)
NEW QUESTION 49
......
Pass Oracle 1z0-996-22 Exam Info and Free Practice Test: https://www.free4dump.com/1z0-996-22-braindumps-torrent.html
Oracle 1z0-996-22 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=1P_c9lzILRqD2bol97vMimh2i9oBuigFR