Cisco 300-615 Cert Guide PDF 100% Cover Real Exam Questions
Pass 300-615 Exam - Real Questions & Answers
NEW QUESTION 37
Refer to the exhibit.
An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. The interface is working correctly and fully operational, but it is not in use.
- B. "out-of-service" indicates that no service graph is in use for this interface.
- C. "out-of-service" is the default interface status in ACI.
- D. The interface policy is misconfigured.
Answer: D
NEW QUESTION 38
Refer to the exhibit.
Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.
WAN-1 is for normal business-day activities.
WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?
- A. The event timer must be written in epoch time format.
- B. The applet called "Backup" must include an action to remove the current static route.
- C. The Cron entry must be configured without double quotes.
- D. The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.
Answer: B
NEW QUESTION 39
An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN.
The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected However, the Linux hosts fail to boot. Which action resolves the issue?
- A. Remove all of the ISO images that are mounted as a virtual CD-ROM
- B. Remove all of the local storage that is installed
- C. Delete and reconfigure the pWWN of the SAN boot target
- D. Delete and reconfigure the boot LUN
Answer: B
NEW QUESTION 40
Refer to the exhibit.
An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Integrate Cisco MDS with Microsoft Active Directory.
- B. Configure SSH logins on Cisco MDS switch.
- C. Include specific users into MDS role configuration.
- D. Configure the role name to match the group name on Microsoft Active Directory.
Answer: D
NEW QUESTION 41
Refer to the exhibit.
A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?
- A. Shut and no shut the interfaces to the FEX.
- B. Roll back to the original image.
- C. Reload the switch.
- D. Enable ISSD after the downgrade is complete.
Answer: B
NEW QUESTION 42
Refer to the exhibit.
HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?
- A. Configure preempt on one of the switches in the HSRP group.
- B. Configure HSRP version 2 on Nexus7K-2.
- C. Configure the correct subnet mask on Nexus7K-1.
- D. Configure the same HSRP priority between the two switches.
Answer: B
NEW QUESTION 43
DRAG DROP
Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.
Select and Place:
Answer:
Explanation:
Section: Compute Platforms
NEW QUESTION 44
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 45
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 46
After upgrading a client's fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)
- A. Admin page, InternalBackup stage.
- B. Service profiles page, InternalBackup stage
- C. Admin page, PollInternalBackup stage
- D. Equipment FSM page, PollInternalBackup stage
- E. Equipment FSM page, InternalBackup stage
Answer: D,E
NEW QUESTION 47 
Refer to the exhibit. The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. event-default action statement
- B. IP address of the SNMP server
- C. policy-default action statement
- D. event statement
Answer: B
Explanation:
Section: Automation
NEW QUESTION 48
Refer to the exhibit.
The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?
- A. Trunk mode must be activated.
- B. The SFP is unsupported.
- C. The interface is in an incorrect mode.
- D. VSAN 1 is suspended.
Answer: A
NEW QUESTION 49 
Refer to the exhibit. An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?
- A. Set the OSPF media type to point-to-point.
- B. Disable the check of the MTU value.
- C. Adjust the MTU on Router-A to 1600.
- D. Adjust the MTU on Router-B to 1604.
Answer: B
Explanation:
Section: Network
NEW QUESTION 50
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 51
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 52
Refer to the exhibit.
After a failover occurs, which two actions must be performed on Switch-B to manually preempt the operational primary role back to Switch-A? (Choose two.)
- A. Configure the local vPC role priority to have a higher value than Switch-A.
- B. Disable and then re-enable the vPC peer-keepalive link.
- C. Configure the local vPC role priority to have a lower value than Switch-A.
- D. Configure the local vPC role priority to have the same value as Switch-A.
- E. Disable and then re-enable the vPC peer link.
Answer: A,E
NEW QUESTION 53
Refer to the exhibit.
An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Statically configure the target information in the Boot Policy.
- B. Configure an MTU size of 9000 on the appliance port.
- C. Configure a QoS policy on the vNIC.
- D. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
Answer: A
NEW QUESTION 54
Refer to the exhibit.
After the configuration is performed, guestshell continues to use 2%CPU. Which action resolves the issue?
- A. Reboot the switch
- B. Resync the database
- C. Recreate the guestshell
- D. Reboot the guestshell
Answer: D
NEW QUESTION 55 
Refer to the exhibit. An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. The interface is working correctly and fully operational, but it is not in use.
- B. "out-of-service" indicates that no service graph is in use for this interface.
- C. "out-of-service" is the default interface status in ACI.
- D. The interface policy is misconfigured.
Answer: D
Explanation:
Section: Compute Platforms
NEW QUESTION 56
Refer to the exhibit.
A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues What is the role of the interface Eth1/7?
- A. IOM host interface
- B. server interface
- C. IOM network interface
- D. fabric interconnect uplink interface
Answer: D
Explanation:
Explanation
E1/7 is border interface, which is used as uplink. All other veth interfaces are SIF, which stands for Server Interface.
NEW QUESTION 57
......
Ways to Weave Success in the Cisco 300-615 Exam
To gain in-depth mastery over all the mentioned exam topics, one must take the help of dependable study resources. Troubleshooting Cisco Data Center Infrastructure (DCIT) v7.0, offered by the vendor, is the most dependable training course as it polishes the test-taker at a conjectural and practical level.
The preparation content you gain after purchasing the course can be accessed for 180 days. It includes information for self-paced studies, video tutorials, and labs. Taking-up this program also allows you to earn 50 continuing education credits. The lab sessions blended with lectures ensure the most complete understanding of what awaits you in the test. This kind of learning is extensive and result-oriented.
When it comes to content, training throws light on concepts like VLANs and private VLANs, troubleshooting of routing protocols, handling port channels’ problems, Overlay Transport Virtualization (OTV), and Virtual Extensible LAN.
Professionals like data center engineers, consulting systems engineers, technical solutions architects, and server administrators can enroll in this course and hone their skills a little bit further.
In addition, note that self–study is an important aspect of exam preparation. For this purpose, books like “How I Passed Troubleshooting Cisco Data Center Infrastructure (300-615 DCIT) Exam” (Rocismo Liolentz Publications) will be beneficial. This material is valuable as it helps to learn some viable tips and tricks that will help you successfully pass the test.
Obligatory Prerequisites
Though Cisco 300-615 is associated with the professional stage, there are no mandatory prerequisites to be met for becoming eligible. It is open for all. However, it won’t hurt if the test-taker has already explored the data center industry and has gained hands-on experience of about three to five years in generating these solutions.
Knowing the Associated Certification
Cisco 300-615, or DCIT, is related to two certifications. The first one is CCNP Data Center which is a professional certificate whose key focus is on the key operation, compute, automation, and management skills required to ensure hassle-free data center performance. Accredited individuals are known to be experts in creating viable data center solutions. Note that to earn it, you should pass the core exam 350-601 by code as well.
The second certification associated with Cisco 300-615 is Cisco Certified Specialist - Data Center Operations. As the name says, it is related to the specialist level and imparts the best-of-breed troubleshooting knowledge as well as an understanding of a data center infrastructure.
100% Free 300-615 Daily Practice Exam With 99 Questions: https://www.free4dump.com/300-615-braindumps-torrent.html
Pass 300-615 Review Guide, Reliable 300-615 Test Engine: https://drive.google.com/open?id=14j7emJ6UBbXvEa85Sh20m_rOEcCXWjGx