
Easy To Download Lpi 201-450 Exam Dumps Updated 162 Questions
New Updated 201-450 Exam Questions 2023
Lpi 201-450 (LPIC-2 Exam 201, Part 1 of 2, version 4.5) Exam is a professional certification exam designed for IT professionals who want to demonstrate their expertise in Linux administration. 201-450 exam is part of the LPIC-2 certification program and covers topics such as file systems and storage, networking configuration, and system maintenance. Passing 201-450 exam is a valuable achievement for IT professionals who want to advance their careers in Linux administration and demonstrate their knowledge and skills to employers.
NEW QUESTION # 19
The correct command sequence to create and mount logical volumes on a Linux system is:
- A. lvcreate, pvcreate, vgcreate, mkfs, mount
- B. vgcreate, lvcreate, pvcreate, mount, mkfs
- C. mkfs, pvcreate, vgcreate, lvcreate, mount
- D. pvcreate, vgcreate, lvcreate, mkfs, mount
- E. pvcreate, lvcreate, vgcreate, mkfs, mount
Answer: D
NEW QUESTION # 20
CORRECT TEXT
What command will remove a physical volume from a volume group? (Specify ONLY the command without any path or parameters.)
Answer:
Explanation:
vgreduce, /sbin/vgreduce
NEW QUESTION # 21
Due to extreme system use, a Linux system requires some additional swap space. To initialize 5 GB of additional swap space, which combination of commands should be used?
- A. touch -5G /tmp/swapfile; swapon /tmp/swapfile
- B. dd if=/dev/zero of=/tmp/swapfile bs=1024 count=5120000; mkswap /tmp/swapfile;
mount /tmp/swapfile - C. mkswap /tmp/swapfile 512000; swapon /tmp/swapfile
- D. dd if=/dev/zero of=/tmp/swapfile bs=1024 count=5120000; swapon /tmp/swapfile
- E. dd if=/dev/zero of=/tmp/swapfile bs=1024 count=5120000; mkswap /tmp/swapfile;
swapon /tmp/swapfile
Answer: E
NEW QUESTION # 22
Which of the filter keywords below could be used in the following command:
tcpdump -i eth0 ____________ 203.0.113.8
(Choose three.)
- A. ipv6
- B. dst
- C. src
- D. ip
- E. host
Answer: B,C,E
NEW QUESTION # 23
If the file containing the Linux kernel is deleted, what happens when the system boots?
- A. The bootloader mounts the root filesystem read-only and launches /bin/sh directly in order to allow the administrator to reinstall the kernel
- B. Instead of the kernel, the initramfs is loaded and instructed to mount the root filesystem and reinstall the kernel from the original package or from source
- C. The system starts normally since the bootloader copies the kernel to the master boot record of the hard disk
- D. Without a kernel system cannot boot and, depending on the bootloader, an error is displayed
Answer: D
NEW QUESTION # 24
What are the options to node.startup in the iscsid.conf file? (Choose TWO correct answers.)
- A. login
- B. initiate
- C. manual
- D. automatic
- E. discover
Answer: C,D
NEW QUESTION # 25
Which archive format is used to create an initramfs image?
- A. gzip
- B. cpio
- C. RAR
- D. tar
- E. bzip2
Answer: B
NEW QUESTION # 26
What mount option must be used in /etc/fstab when mounting an iSCSI target?
- A. iscsi
- B. _santarget
- C. waitiscsi
- D. _netdev
Answer: D
NEW QUESTION # 27
The following is an excerpt from the output of tcpdump -nli eth1:
1 3:03:17.277327 IP 192.168.123.5.1065 > 192.168.5.112.21: Flags [.], ack 1 (truncated)
1 3:03:17.598624 IP 192.168.5.112.21 > 192.168.123.5.1065: Flags [P.], seq (truncated) Which network service or protocol was used?
- A. SSH
- B. DHCP
- C. DNS
- D. HTTP
- E. FTP
Answer: E
NEW QUESTION # 28
Which of the following properties should be recorded in order to monitor the quality of a network link? (Choose two.)
- A. Number of used TCP ports
- B. Bandwidth in both directions
- C. Number of nodes using the link
- D. Number of IPv4 and IPv6 packets
- E. Effective Latency
Answer: B,E
NEW QUESTION # 29
CORRECT TEXT
Which command is used to unload a single module currently loaded by the kernel without unloading any modules that it depends upon? (Specify the command with or without path information)
Answer:
Explanation:
rmmod, /sbin/rmmod
NEW QUESTION # 30
CORRECT TEXT
After a lot of write operations, the administrator want to ensure that the kernel flushes the file system buffers to disk. Which command will accomplish this? (Specify ONLY the command without any path or parameters.)
Answer:
Explanation:
sync
NEW QUESTION # 31
CORRECT TEXT
Which directory contains system-specific systemd unit files? (Specify the full path to the directory.)
Answer:
Explanation:
/lib/systemd/system
NEW QUESTION # 32
CORRECT TEXT
Consider the following /etc/fstab file:
/dev/hda1 swap swap defaults 0 0
/dev/hda2 / ext2 defaults 1 1
/dev/hda3 /home ext2 defaults 1 2
none /proc proc defaults 0 0
/dev/sdb1 /media/usb0 vfat user,noauto 0 0
What is one of the possible commands that an ordinary (non-root) user can use to mount the /dev/sdb1 partition on the /media/usb0 mount point? (Please enter the command with all parameters and/or options but without any file system type options.)
Answer:
Explanation:
mount /dev/sdb1, mount /media/usb0, /bin/mount /dev/sdb1, /bin/mount/media/usb0, mount /media/usb0/, /bin/mount /media/usb0/
NEW QUESTION # 33
After changing the default runlevel in the SysV-init configuration file, the system boots in a different than intended runlevel. Where else could this different runlevel be defined?
- A. In the /boot/initramfs file
- B. In the /etc/sysctl.conf
- C. In the boot loader configuration file
- D. In the /etc/runlevel file
- E. In the /etc/rc.d/rc.local file
Answer: C
NEW QUESTION # 34
Which of the following commands can be used to script interactions with various TCP or UDP services?
- A. nc
- B. strings
- C. tcpdump
- D. ftp
- E. wget
Answer: A
NEW QUESTION # 35
What should be done after updating the configuration file for syslogd in order to make the changes become effective? (Choose TWO correct answers.)
- A. Run the command syslogd -u.
- B. Send the HUP signal to the syslogd process.
- C. No action is required, syslogd will notice the updated configuration file after a few minutes.
- D. Restart the syslogd service.
Answer: B,D
NEW QUESTION # 36
What is the main template file used by autofs?
- A. default.maps
- B. autofs.master
- C. auto.conf
- D. auto.master
Answer: D
NEW QUESTION # 37
Which of the following commands creates a Btrfs subvolume named volumein/mnt?
- A. btrfs subvolume new volume /mnt
- B. btrfs create subvolume /mnt volume
- C. btrfs subvolume create /mnt/volume
- D. btrfs subvolume add -n volume /mnt
- E. btrfs-subvolume create /mnt/volume
Answer: C
NEW QUESTION # 38
What happens if the Linux kernel can't mount the root filesystem when booting?
- A. An error message is shown and the administrator is asked by the kernel to specify a valid root filesystem to continue the boot process.
- B. An error message is shown stating that the corresponding kernel module couldn't be loaded.
- C. An error message is shown showing which device couldn't be mounted or informing that init couldn't be found.
- D. An error message is shown and the system boots in maintenance mode.
- E. An error message is shown and the system reboots after a keypress.
Answer: C
NEW QUESTION # 39
Which of the following filter keywords for tcpdump specify the transfer direction for network packets? (Choose TWO correct answers.)
- A. both
- B. dest
- C. src or dst
- D. src
- E. source
Answer: C,D
NEW QUESTION # 40
During booting, when the Linux kernel loads an initramfs file, which command from the initramfs will be executed first, if present?
- A. /linuxrc
- B. /sbin/init
- C. /rc.local
- D. /initrd
- E. /init
Answer: E
NEW QUESTION # 41
Which of the following commands erases the contents of the /dev/sdb3partition?
- A. dd of=/dev/zero if=/dev/sdb3
- B. rm /dev/sdb3
- C. dd if=/dev/zero of=/dev/sdb3
- D. umount /dev/sdb3
Answer: C
NEW QUESTION # 42
......
Updated Free Lpi 201-450 Test Engine Questions with 162 Q&As: https://www.free4dump.com/201-450-braindumps-torrent.html
The Best LPIC 2 201-450 Professional Exam Questions: https://drive.google.com/open?id=1-MYRq5ju7SBx7HIRM6BkrVB9qExLpyQk