EMC D-VXR-DS-00 Exam Info and Free Practice Test | Free4Dump
Pass EMC D-VXR-DS-00 Premium Files Test Engine pdf - Free Dumps Collection
NEW QUESTION # 68
What are two rules for witness on a VxRail stretched cluster? (Choose two.)
- A. It must be deployed in advance.
- B. The Witness appliance is the same for vSAN ESA and vSAN OSA architecture.
- C. It can be managed by a separate vCenter than the one managing the VxRail cluster.
- D. Only a virtual appliance is supported.
- E. It must be the same vSphere version as the VxRail nodes.
Answer: B,C
Explanation:
The witness appliance is the same for both vSAN ESA and OSA architectures, providing consistency across deployments.
The witness can be managed by a separate vCenter server than the one managing the VxRail cluster, allowing flexible management options.
NEW QUESTION # 69
Which steps are required to use the VxRail Sizing Tool effectively?
(Choose two)
Response:
- A. Configure Fibre Channel zones
- B. Import Live Optics data
- C. Select reference workloads
- D. Set up RAID configurations
Answer: B,C
NEW QUESTION # 70
What is the recommended network configuration for a VxRail Dynamic Node cluster?
Response:
- A. Dedicated storage VLANs
- B. Dual-switch network topology
- C. High-speed Ethernet with multiple uplinks
- D. Fibre Channel connectivity for storage
Answer: C
NEW QUESTION # 71
When expanding a VxRail cluster, what step ensures seamless integration?
Response:
- A. Running the Initial Configuration Wizard
- B. Validating node compatibility
- C. Upgrading the vCenter Server
- D. Replacing all NICs with 10GbE interfaces
Answer: B
NEW QUESTION # 72
During cluster creation in VxRail Manager, which parameter must be specified for networking?
Response:
- A. Storage pool capacity
- B. Witness host IP
- C. vSAN RAID level
- D. Management VLAN ID
Answer: D
NEW QUESTION # 73
In a VxRail cluster, what is the function of the Witness Host in a 2-node configuration?
Response:
- A. Handles storage deduplication and compression
- B. Balances workloads between the nodes
- C. Acts as a tie-breaker during node failures
- D. Provides backup and recovery for the cluster
Answer: C
NEW QUESTION # 74
What parameters are evaluated by Live Optics to optimize VxRail node configurations?
(Choose two)
Response:
- A. Network throughput requirements
- B. Memory usage patterns
- C. Historical CPU utilization
- D. Cluster expansion needs
Answer: B,C
NEW QUESTION # 75
Which VxRail Dynamic Node configuration supports a VxRail-managed vCenter on the local cluster?
- A. PowerFlex R750 connected via SDC
- B. PowerMax 2000 connected via FC-NVMe
- C. PowerStore 5200T connected via NVMe/TCP
- D. Unity XT 680 connected via NFS
Answer: C
Explanation:
The PowerStore 5200T connected via NVMe/TCP supports integration with a VxRail-managed vCenter on the local cluster, enabling optimized storage performance and management within the VxRail ecosystem.
NEW QUESTION # 76
What type of network configuration does VxRail Manager require during the cluster setup process?
Response:
- A. Dynamic IPs using DHCP for all traffic
- B. Segregated networks for backup and recovery
- C. Static IPs for management and vSAN traffic
- D. Fibre Channel zoning for storage traffic
Answer: C
NEW QUESTION # 77
An architect for a new VxRail cluster plans to use predefined network profile for vSphere Distributed Switch.
Which three configurations are available in predefined profile? (Choose three.)
- A. 2x10 GbE (Integrated NIC)
- B. 4x25 GbE (Integrated NICs)
- C. 4x1 GbE (Integrated NIC)
- D. 2x25 GbE (PCIe NICs)
- E. 4x10 GbE (Integrated NIC)
Answer: A,D
Explanation:
Predefined network profiles for vSphere Distributed Switch in VxRail typically include configurations such as
2x10 GbE integrated NICs, 2x25 GbE PCIe NICs, and 4x25 GbE integrated NICs to accommodate various performance and connectivity requirements.
NEW QUESTION # 78
An IT Architect is using the VxRail Sizing Tool. The architect started a new project, provided the project type, and selected the solution type.
What is the next step that the architect needs to undertake to proceed with the process?
- A. Save the project
- B. Enter workload requirements
- C. Export the result to a report
- D. Size the configuration
Answer: B
Explanation:
After selecting the project and solution type in the VxRail Sizing Tool, the next step is to enter the workload requirements to tailor the sizing and configuration recommendations accurately.
NEW QUESTION # 79
Which network settings must be configured in VxRail Manager during setup?
(Choose two)
Response:
- A. DNS and NTP server addresses
- B. VLAN for vSAN traffic
- C. RAID levels for storage groups
- D. Witness host IP for fault domains
Answer: A,B
NEW QUESTION # 80
During the creation of a VxRail project, which components are critical for initial setup?
(Choose two)
Response:
- A. Witness node for 2-node clusters
- B. Static IP addresses for cluster nodes
- C. Backup schedule configuration
- D. Management VLAN configuration
Answer: B,D
NEW QUESTION # 81
The VxRail Cluster Configuration Report includes which three parameters that are required to perform the deployment? (Choose three.)
- A. PTP server IP address
- B. vCenter Server hostname
- C. DNS server IP address
- D. VxRail node hostnames
- E. Administrative passwords
Answer: B,C,D
Explanation:
The VxRail Cluster Configuration Report includes essential deployment parameters such as vCenter Server hostname, DNS server IP address, and VxRail node hostnames to ensure proper network and management configuration during deployment.
NEW QUESTION # 82
What is a primary benefit of a stretch cluster configuration in VxRail?
Response:
- A. Cross-site disaster recovery
- B. Increased IOPS
- C. Simplified network architecture
- D. Reduced storage footprint
Answer: A
NEW QUESTION # 83
What feature distinguishes vSAN ESA from traditional vSAN?
Response:
- A. Enhanced fault tolerance
- B. Increased deduplication rates
- C. Simplified snapshot management
- D. Optimized performance for all-flash storage
Answer: D
NEW QUESTION # 84
What is a key consideration when selecting nodes for a high-availability VxRail cluster?
Response:
- A. Redundant network interfaces
- B. High-density storage drives
- C. Balanced compute and memory resources
- D. Hybrid SSD and HDD configurations
Answer: C
NEW QUESTION # 85
What is the minimum number of nodes required to create a standard VxRail cluster?
Response:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 86
Which tasks can be completed using the VxRail Initial Configuration Wizard?
(Choose two)
Response:
- A. Create storage pools
- B. Enable vSAN deduplication
- C. Configure management network settings
- D. Assign node IP addresses
Answer: C,D
NEW QUESTION # 87
Which tool can be used to create VxRail projects and configurations?
Response:
- A. VMware vSphere Client
- B. VxRail Manager
- C. Dell OpenManage Enterprise
- D. VxRail Sizing Tool
Answer: B
NEW QUESTION # 88
Which document from the VxRail Configuration Portal can be used to validate site readiness before a deployment?
- A. Getting Started Guide
- B. Configuration Report
- C. Deployment Planning Guide
- D. Pre-deployment Checklist
Answer: D
Explanation:
The Pre-deployment Checklist from the VxRail Configuration Portal is used to validate site readiness by ensuring all necessary prerequisites and environment conditions are met before deployment.
NEW QUESTION # 89
......
Updated Official licence for D-VXR-DS-00 Certified by D-VXR-DS-00 Dumps PDF: https://www.free4dump.com/D-VXR-DS-00-braindumps-torrent.html
New 2025 Realistic D-VXR-DS-00 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=1I57FR0HFSjxqg6_iscSGwrP8UrINzKOx