Get The Important Preparation Guide With NACE-CIP1-001 Dumps
Get Totally Free Updates on NACE-CIP1-001 Dumps PDF Questions
Do you know about the need for the NACE CIP1-001 exam?
There are different kinds of certifications that can help candidates to achieve a good career. The NACE CIP1-001 exam is one of them. It allows the candidates to get a certification as a certified coatings inspector. There are different types of NACE CIP1-001 exams available. You can choose any of them. You should not waste your time by choosing any wrong exam. We are giving you all the information about the NACE CIP1-001 exam. Choose a suitable exam for you. A credit card can be used to purchase any product or service. You can use it to pay for the NACE CIP1-001 exam dumps. A prospective employer can easily find a suitable candidate through these materials. Our products are very helpful in the preparation for this exam. It is the best material that you can use to pass this exam easily. Permitted to transport is the most important issue for any business. Abrasive is a type of powder used in various industries. It is also called abrasive dust. The purpose of using this powder is to remove the unwanted layers from any surface. It is used in many types of industries such as steel, power, mining, and construction. In this process, abrasive can be harmful to people. There are different types of abrasive available. They include fine, coarse, superfine, and ultrafine.
NEW QUESTION 56
Checking is
- A. surface breaks in the film that often result from grease or oil contamination and revel the substrate.
- B. a very small hole in a coating caused when air or solvent is trapped in porous film and then escapes.
- C. a fine crack in the surface of a coating that rarely reaches the substrate
- D. an exposed area of the substrate or previous coat material, caused by poor application technique.
Answer: C
NEW QUESTION 57
You are asked to be the only coating inspector on a small bridge recoating job where existing coating contains lead. The owners' representative has supplied you with the local code governing the removal and disposal of lead based coatings, however upon reading the document you having great deal of difficulty understanding the technical language.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Minimize your lack of understanding and go ahead with the inspection task to the best of your ability
- B. Carefully review the document and do the best you can
- C. Hire a third patty to assist you in understanding the document
- D. Advise the owners' representative of your lack of knowledge in this area
Answer: B
NEW QUESTION 58
Common errors that may produce inaccurate readings when using a Dial-Type Magnetic Pull-Off Dry Filth Thickness (DFT) gauge include:
Select All That Apply
- A. Rotating the dial too fast when taking measurements
- B. Measuring ditty, tacky, or soft films
- C. Taking measurements too far from the edge of a surface
- D. Failing to determine the base metal reading (BMR)
Answer: A,B,D
NEW QUESTION 59
A NACE Coating Inspector is permitted to transport coating material when:
- A. Asked to do so by the Owner's Representative
- B. Asked to do so by the Coating Application team
- C. If the Inspector meets all the necessary requirements for Transportation of Dangerous Goods
- D. The Inspector should never transport coating material
Answer: D
NEW QUESTION 60
When using the ISO comparator in accordance with ISO 8503, if the surface profile does not directly compare to one of the four segments the inspector should:
- A. Use another method as the comparator method is too subjective
- B. Record the segment with the less aggressive profile
- C. Record your result by identifying two segments
- D. Record the segment with the more aggressive profile
Answer: B
NEW QUESTION 61
Galvanic corrosion occurs on which of the following substrates:
- A. Metal
- B. Wood
- C. Fiberglass Reinforced Plastic
- D. Concrete
Answer: A
NEW QUESTION 62
SSPC SP 1 identifies the use of:
- A. A wide variety of materials
- B. Organic solvents
- C. Inorganic solvents
- D. Biodegradable detergents
Answer: A
NEW QUESTION 63
The initial steel condition is important to the NACE Inspector because:
- A. The Inspector may have to reject the Steel
- B. Less abrasive is need if the mill Scale s gone
- C. It affects the final appearance after blasting
- D. If the steel is pitted more coating will be required
Answer: A
NEW QUESTION 64
You are the NACE Inspector on a job where the Owner's specification requites you to perform a twice daily check of blast pressure at the nozzle. It is now day 30 on the job and all of your readings have been within compliance. The Contractor complains that these checks taking up much time and in view of the compliant results they are unnecessary.
Your FIRST preferred course of action is to:
- A. Skip the checks and just record the same readings as you have been getting
- B. Skip the checks as you are. confident the blast pressure is OK
- C. Keep doing the checks regardless
- D. Keep doing the checks and consult the Owner's representative for direction
Answer: D
NEW QUESTION 65
When the joint NACE/SSPC abrasive blast cleaning standards are specified, the pictures in SSPC VIS 1 can be used as:
- A. A final conflict resolution method
- B. Pass/fail criteria
- C. A method to grade surface profile
- D. A general guide
Answer: D
NEW QUESTION 66
Passivation can best be described as:
- A. A protective metallic oxide surface layer that slows corrosion
- B. A coating layer applied to the surface to inhibit corrosion
- C. Complete elimination pf the corrosion process
- D. Treating metal with a liquid inhibiter
Answer: A
NEW QUESTION 67
What is used to determine compressed air cleanliness?
- A. Blotter test
- B. Profilometer
- C. Psychrometer
- D. Needle pressure gauge
Answer: B
NEW QUESTION 68
Non Conformance Reports are completed by the Inspector:
- A. In every instance that an item does not meet the specification requirements
- B. When the Inspector and Contractor deem it to be a significant non-conforming item
- C. In accordance with the specification's definition of a non-conformance
- D. When the Inspector deems it to be a significant non-conforming item
Answer: B
NEW QUESTION 69
Safety Data Sheets must be carefully reviewed by:
- A. The Owner's personnel
- B. The Inspection personnel
- C. All personnel involved in the job
- D. The Application personnel
Answer: C
NEW QUESTION 70
Removal of surface contaminants is done by:
- A. Waterjetting
- B. Abrasive blasting
- C. Scarifying
- D. A combination of methods
Answer: D
NEW QUESTION 71
When working as a NACE Inspector in a situation where there is a difference of opinion, the Inspector needs to:
- A. Achieve consensus through negotiation
- B. Never change his/her mind
- C. Go with the majority opinion
- D. Call the supervisor
Answer: D
NEW QUESTION 72
......
Prepare With Top Rated High-quality NACE-CIP1-001 Dumps For Success in Exam: https://www.free4dump.com/NACE-CIP1-001-braindumps-torrent.html
NACE-CIP1-001 Free Certification Exam Easy to Download PDF Format 2022: https://drive.google.com/open?id=1FqoxDv9pA7KNDn2JaEVsoSL0wS-4gtcc