New HP HPE6-A73 Dumps & Questions Updated on 2024
Dumps to Pass your HPE6-A73 Exam with 100% Real Questions and Answers
HPE6-A73 certification exam is ideal for network professionals who want to advance their careers and demonstrate their expertise in Aruba switching solutions. Aruba Certified Switching Professional Exam certification is a valuable asset for anyone who works with Aruba networks, including network administrators, system engineers, and consultants. It is also a great way to stand out in a crowded job market and increase your earning potential.
NEW QUESTION # 49
An administrator wants to leverage always-on PoE on AOS-CX switches. Which statement is correct regarding this feature'?
- A. Provides surge protection for PoE and non-PoE ports
- B. Requires NetEdit to implement
- C. Supports all AOS-CX switches
- D. Provides up to 60W of power per port
Answer: D
NEW QUESTION # 50
What is a best practice concerning voice traffic and dynamic segmentation on AOS-CX switches?
- A. Switch authentication and local forwarding of the voice traffic
- B. Controller authentication and port-based tunneling of the voice traffic
- C. Switch authentication and user-based tunneling of the voice traffic
- D. Controller authentication and user-based tunneling of the voice traffic
Answer: B
NEW QUESTION # 51
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- B. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
- C. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- D. Implement local user roles with a gateway role defined on the AOS-CX switches
Answer: D
NEW QUESTION # 52
Examine the following ACL rule policies:
Permit traffic from 10.2.2.1 through 10.2.2.30 to anywhere
Permit traffic from 10.2.2.40 through 10.2.2.55 to anywhere
Deny all others
Based on this policy, place the following ACL rule statements in the correct order to accomplish the above filtering policy.
- A. deny ip 10.2.2.31 255.255.255.255 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any - B. permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any
deny ip 10.2.2.31 255.255.255.255 any
deny ip 10.2.2.32 255.255.255.224 any - C. deny ip 10.2.2.31 255.255.255.255 any
permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.0 255.255.255.192 any - D. deny ip 10.2.2.31 255.255.255.255 any
permit ip 10.2.2.40 255.255.255.248 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any
Answer: C
NEW QUESTION # 53
In AOS-CX switching, what determines when a frame is forwarded by the switch between the ingress and the egress port?
- A. Fabric Load Balancer
- B. Ingress port
- C. VSX switch tables
- D. Egress port
Answer: B
NEW QUESTION # 54
What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?
- A. Uses IPSec to protect the management traffic
- B. Uses IPSec to protect the management and data traffic
- C. Uses the same management protocol as Aruba APs
- D. Supports only port-based tunneling
Answer: C
Explanation:
because both AP and Switch use PAPI . Moreover in AOS-CX switch currently not support port based tunnel. AOS-CX switch only support User Based Tunnel (UBT)
NEW QUESTION # 55
An administrator has an AOS-CX switch configured with:
Based on the above configuration, how many OSPF routes will routing switches see in Area 1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 56
An administrator in a company of 348 users has a pair of AOS-CX switches with connections to external networks Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
- A. Create a route map with the correct route type and metrics
- B. Define the route type and metrics in the OSPF process.
- C. Define a class and policy map withthe correct route type and metrics.
- D. Create a classifier policy with the correct route type and metrics
Answer: A
NEW QUESTION # 57
Examine the partial output of the BGP routing table of an AOS-CX switch:
The switch is learning about four possible path to reach the 1.0.0.0/8 network. Based on this output, which next-hop route will the AOS-CX select to be placed in the IP routing table?
- A. 192 168 1 5
- B. 192 1684 5
- C. 192 168 2 5
- D. 192 168 3 5
Answer: D
NEW QUESTION # 58
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. 802.1X must be configured to work in fallback mode
- B. Device mode should be implemented
- C. Device fingerprinting is required for authentication
- D. The client-limit setting for port access needs to be changed
Answer: A
NEW QUESTION # 59
An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
- A. Define a class and policy map with the correct route type and metrics
- B. Create a route map with the correct route type and metrics
- C. Define the route type and metrics in the OSPF process
- D. Create a classifier policy with the correct route type and metrics
Answer: B
NEW QUESTION # 60
A company uses NetEdit to manage a network of 700 AOS-CX switches and approximately 1,000 other SNMP-capable devices.
Which management solution should the company use to monitor all the devices, as well as see a topology picture of how all the devices are connected together?
- A. Aruba AirWave
- B. NetEdit
- C. Aruba Activate
- D. Network Analysis Engine (NAE)
Answer: B
NEW QUESTION # 61
Which AOS-CX switches support weighted fair queuing (WFQ)?
- A. Both 6300 and 6400
- B. Both 8320 and 8325
- C. 8400 only
- D. 6300 only
Answer: C
NEW QUESTION # 62
Examine the attached diagram
Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?
- A. Server 2 cannot access the core layer.
- B. Server 1 can access the core layer via both uplinks.
- C. Server 2 can successfully access the core layer via the keepalive link.
- D. Server 1 and Server 2 can communicate with each other via the core layer.
Answer: D
NEW QUESTION # 63
An administrator is supporting a network with the access layer consisting of AOS-CX 6300 and 6400 switches. The administrator needs to quickly deploy Aruba IAPs and security cameras in the network, ensuring that the correct QoS and VLAN settings are dynamically applied to the switch ports. Currently, switches are not configured to do device authentication, and no authentication server exists in the network.
Which AOS-CX feature should the administrator use to dynamically assign the policy settings to the correct switch ports?
- A. Device profiles
- B. Change of authorization
- C. Dynamic segmentation
- D. Voice VLANs
Answer: A
NEW QUESTION # 64
A network administrator is managing a network that deploys a multicast service The administrator has multiple streamssuccessfully being routed by PIM-DM in the network The administrator then adds a new stream with a destination addressof 239.0.0 1. However clients who have not joined the stream are receiving it.What should the administrator do to fix this problem?
- A. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
- B. Define the 239 0 0 1 stream on the rendezvous point (RP).
- C. Define the 239 0 0 1 stream on the PIM candidate bootstrap router
- D. Change the destination multicast address to 239 1.1.1.
Answer: A
NEW QUESTION # 65
Examine the network topology.
The network is configured for OSPF with the following attributes:
Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Area 1 has 23 routes
- B. ISP 1 is not reachable from any area.
- C. Area 0 has 81 routes
- D. Corel has received one type 5 LSA from the ASBR.
Answer: C
NEW QUESTION # 66
An administrator is managing a VSX pair of AOS-CX switches An administrator configures the following on the primary AOS-CX switch:
- A. The VLAN is only created on the secondary switch.
- B. The operation is not allowed by the switch and a CLI error is displayed
- C. The VLAN is created on both the primary and secondary switches
- D. The primary switch will erase VLAN 200 from the VSX pair
Answer: C
NEW QUESTION # 67
Examine the AOS-CS switch output:
Based on this output, what is correct?
- A. A local user role was deployed using a ClearPass solution
- B. Only 802.1X authentication is configured on the port
- C. 802.1X authentication was successful, but MAC authentication is yet to start
- D. 802.1X authentication occurred and downloadable user roles are deployed
Answer: D
NEW QUESTION # 68
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers group web-ports
- B. access-list ip server 10 permit tcp any web-servers web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any group web-servers group web-ports
Answer: B
NEW QUESTION # 69
Which protocol does NetEdit use to discover devices in a subnet during the discovery process?
- A. ICMP
- B. DHCP
- C. LLDP
- D. ARP
Answer: A
NEW QUESTION # 70
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Reduce the hello and dead interval timers
- B. Implement graceful restart
- C. Implement route aggregation
- D. Implement bidirectional forwarding detection (BFD)
Answer: C
NEW QUESTION # 71
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
- B. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- C. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
- D. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
Answer: B
NEW QUESTION # 72
An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning.
What would best meet the administrator's needs when deploying AOS-CX switches?
- A. VSX
- B. NAE
- C. VSF
- D. Dynamic segmentation
Answer: A
NEW QUESTION # 73
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. Classifier policies
- B. OSPF route maps using the "set metric" command
- C. User-based tunneling (UBT)
- D. Policy-based routing (PBR)
Answer: D
Explanation:
Guest traffic can be routed with PBR to use GRE tunnels that terminate in the DMZ.
NEW QUESTION # 74
......
Updated Exam HPE6-A73 Dumps with New Questions: https://www.free4dump.com/HPE6-A73-braindumps-torrent.html
Today Updated HPE6-A73 Exam Dumps Actual Questions: https://drive.google.com/open?id=15lM-WqdDLVjWA2VXJ7lpe4qUqno0eP8J