HP HPE6-A73 Practice Verified Answers - Pass Your Exams For Sure! [2021]
Valid Way To Pass Aruba Certified Switching Professional (ACSP) V1's HPE6-A73 Exam
NEW QUESTION 22
An AOS-CX switch is configured to implement downloadable user roles Examine the AOS-CX switch output:
Access11config i$ show aaa authentication port-access interface ail client-status Port Access Client Status Details
Based on this output what is the state of the users access'?
- A. MAC authentication has passed, but 802 1X authentication is in progress
- B. The RADIUS request timed out to the AAA server
- C. No downloadable user role exists
- D. The port should be configured for 802 1X
Answer: C
NEW QUESTION 23
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as pnmary and secondary The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. The VSX LAG hash does not match the remote peer
- B. LACP was enabled in active mode on the VSX LAG
- C. The VSX LAG interfaces are in layer-3 mode
- D. Local optimization was not enabled on the VSX LAG
Answer: A
NEW QUESTION 24
What is correct regarding the configuration of ACLs on AOS-CX switches?
- A. Standard ACLs are used to match on routes when performing route distribution.
- B. Statements with the log keyword are always processed by the switch CPU.
- C. Numbers 100 through 199 and 2000 through 2999 are used when creating extended ACLs.
- D. Wildcard masks are used to match on a range of IP addresses.
Answer: D
NEW QUESTION 25
Examine the VSX-related configuration of the core layer AOS-CX switch:
A network administrator is troubleshooting a connectivity issue involving the VSX LAG (link aggregation) between the core and access layer switch, during HW replacement of one of the core switches.
Which configuration should the administrator add to the core switch to fix this issue?
- A. ICX-Tx-Core1(config)# vsx
ICX-Tx-Core1(config-vsx)# system-mac 02:01:00:00:01:00 - B. ICX-Tx-Core1(config)# interface lag 1 multi-chassis
ICX-Tx-Core1(config-if-lag-if)# mtu 9198 - C. ICX-Tx-Core1(config)# interface 1/1/45
ICX-Tx-Core1(config-if-vlan)# active-gateway ip 192.168.0.0 mac 02:02:00:00:01:00 - D. ICX-Tx-Core1(config)# interface 1/1/46-1/1/47
ICX-Tx-Core1(config-if-vlan)# active-gateway ip 10.1.11.1 mac 02:02:00:00:01:00
Answer: C
NEW QUESTION 26
Examine the configuration performed on newly deployed AOS-CX switches;
After performing this configuration the administrator notices that the switch ports always remain in the EAP-start state. What should the administrator do to fix this problem?
- A. Define the server group cppm
- B. Enable change of authorization (CoA)
- C. Create and assign a local user role to the ports.
- D. Set the ports to client-mode.
Answer: A
NEW QUESTION 27
An administrator is looking for a data center switching solution that will greatly reduce the likelihood of dropped frames when uplink congestion is experienced. Which AOS-CX switch queuing feature meets the administrator's needs?
- A. VOQ
- B. DWWR
- C. FIFO
- D. WFQ
Answer: A
NEW QUESTION 28
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 1 to Client 3
- B. Client 1 to Client 2
- C. Server 1 to Client 1
- D. Server 2 to Client 2
- E. Client 3 to Client 2
Answer: B,C
NEW QUESTION 29
Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:
The downloadable user roles are not being downloaded to the AOS-CX switch Based on the above output , what is the problem?
- A. DNS fails to resolve the ClearPass servers FQDN.
- B. There is a date/time issue between the ClearPass server and the switch.
- C. The AOS-CX swicth does not have the ClearPass certificate involved.
- D. The certificate that ClearPass uses is invalid
Answer: A
NEW QUESTION 30
A network has two AOS-CX switches connected to two different service providers The administrator is concerned about bandwidth consumption on the service provider links and learned that the service providers were using the company as a transit AS.
Which feature should the administrator implement to prevent this situation?
- A. Configure route maps and apply them to BGP
- B. Configure bi-directional forwarding detection on both switches.
- C. Configure the two switches as route reflectors.
- D. Configure a classifier policy to disable MED.
Answer: A
NEW QUESTION 31
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
- B. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- C. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
- D. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
Answer: B
NEW QUESTION 32
An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSXcapabilities. The campus involves a core, as well as multiple access layers. Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?
- A. VRF
- B. VRRP
- C. IP helper
- D. Active gateway
Answer: B
NEW QUESTION 33
A network administrator is implementing OSPF, where there are two exit points. Each exit point has a stateful, application inspection firewall to implement company policies.
What would the best practice be to ensure that one firewall will see both directions of the traffic, preventing asynchronous connections in the network?
- A. Both ASBRs should define External Type 2 routes for the
- B. Both ASBRs should define External Type 1 routes for the
- C. Both ASBRs should define External Type 1 routes for the
- D. Both ASBRs should define External Type 2 routes for the
Answer: B
NEW QUESTION 34
How is NetEdit installed at a customer location?
- A. Via a DVD using a virtualized platform like Microsoft's Hyper-V
- B. Via an Aruba NetEdit hardware appliance
- C. Via the Aruba Central cloud solution
- D. Via an OVA file and a virtualized platform like VMware's ESXi
Answer: D
NEW QUESTION 35
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concernedthat when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affectnetwork connectivity especially VoIP calls, in the connected access layer switches What should the administrator do on the aggregation layer switches to alleviate this issue?
- A. implement graceful restart
- B. implement route aggregation
- C. Reduce the hello and dead interval timers
- D. Implement bidirectional forwarding detection (BFD).
Answer: D
NEW QUESTION 36
A company requires access by all users, guests, and employees to be authenticated. Employees will be authenticated using 802.1X, whereas guests will be authenticated using captive portal. Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?
- A. 802.1X, captive portal, and MAC-Auth
- B. Both 802.1X and captive portal
- C. Both 802.1X and MAC-Auth
- D. 802.1X only
Answer: C
NEW QUESTION 37
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 5 seconds
- B. Once every 30 seconds
- C. Once every 60 seconds
- D. Once every 1 second
Answer: A
NEW QUESTION 38
Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:
Switch# show port-access role clearpass
Role information:
Name : icxarubadur_employee-3044-2
Type : clearpass
Status: failed, parsing_failed
Reauthentication Period :
Authentication Mode :
Session Timeout :
The downloadable user roles are not being downloaded to the AOS-CX switch. Based on the above output, what is the problem?
- A. There is a date/time issue between the ClearPass server and the switch
- B. The certificate that ClearPass uses in invalid
- C. The AOS-CX switch does not have the ClearPass certificate involved
- D. DNS fails to resolve the ClearPass server's FQDN
Answer: B
NEW QUESTION 39
When comparing PIM-DM and PIM-SM, which multicast components are only found with PIM-SM in multicast routing? (Choose two.)
- A. Bootstrap router
- B. Shortest path tree
- C. Designated router
- D. Rendezvous point
- E. IGMP querier
Answer: B,D
NEW QUESTION 40
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of
"Unknown".
What is the cause of this issue?
- A. A connectivity issue exists between NAE and the AOS-CX switch
- B. The RESTful API has not been enabled on the AOS-CX switch
- C. The administrator does not have the appropriate credentials to interact with NAE
- D. The number of scripts or agents has exceeded the hardware's capabilities
Answer: A
NEW QUESTION 41
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches withAOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.
Which solution should the company implement?
- A. RADIUS dynamic authorization
- B. Downloadable user roles
- C. User-based tunneling
- D. IPSec
Answer: A
NEW QUESTION 42
What is the correct way of associating a VRF instance to either a VLAN or an interface?
- A. Switch(config)# vlan <VLAN-ID> vrf < vrf-name >
- B. Switch(config)# vlan <VLAN-ID> vrf attach < vrf-name >
- C. Switch(config)# vlan <VLAN-ID>
Switch(config-vlan-<VLAN-ID># vrf attach < vrf-name > - D. Switch(config)# interface <interface-ID>
Switch(config-if)# vlan access <VLAN-ID> vrf attach <vrf-name>
Answer: C
NEW QUESTION 43
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. No downloadable user role exists
- B. The port should be configured for 802.1X
- C. MAC authentication has passed, but 802.1X authentication is in progress
- D. The RADIUS request timed out to the AAA server
Answer: B
NEW QUESTION 44
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.
The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Enable trust settings for the AOS-CX switch's SSL certificate
- B. Remove a script that is no longer used before installing the new script
- C. Install the script's signature before installing the new script
- D. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
Answer: B
NEW QUESTION 45
Examine the attached exhibit.
The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.
Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?
- A. Bidirectional forward detection (BFD)
- B. OSPFv3
- C. Not-so-stubby areas
- D. Virtual links
Answer: D
NEW QUESTION 46
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers web-ports
- B. access-list ip server 10 permit tcp any group web-servers group web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any web-servers group web-ports
Answer: A
NEW QUESTION 47
......
HP HPE6-A73 Pre-Exam Practice Tests | Free4Dump: https://www.free4dump.com/HPE6-A73-braindumps-torrent.html
HPE6-A73 practice test questions, answers, explanations: https://drive.google.com/open?id=1WMWD0QpTe40G_kz_Nhqxb_ceNToaeL4j