Latest Nov-2023 156-585 Dumps PDF And Certification Training
Check your preparation for CheckPoint 156-585 On-Demand Exam
The Importance of CheckPoint 156-585 Certification:
By attaining the CheckPoint 156-585 Certification exam, you will have gained the knowledge and skills necessary to perform security functions within your organization. This is a very important thing to have, as it gives you an edge over other candidates who are seeking other positions in cybersecurity. It also shows that you are knowledgeable enough to identify, destroy or prevent cyberattacks from being successful.
NEW QUESTION # 11
the difference in debugging a S2S or C2S (using Check Point VPN Client) VPN?
- A. the C2S client uses Browser based SSL vpn and cant be debugged
- B. the C2S VPN can not be debugged as it uses different protocols for the key exchange
- C. there is no difference
- D. the C2S VPN uses a different VPN deamon and there a second VPN debug
Answer: A
NEW QUESTION # 12
You have configured IPS Bypass Under Load function with additional kernel parameters ids_tolerance_no_stress=15 and ids_tolerance_stress-15 For configuration you used the *fw ctl set' command After reboot you noticed that these parameters returned to their default values What do you need to do to make this configuration work immediately and stay permanent?
- A. Use script $FWDIR/bin IpsSetBypass.sh to set these parameters
- B. Edit appropriate parameters in $FWDIR/boot/modules/fwkern.conf
- C. Set these parameters again with "fw ctl set" and save configuration with "save config"
- D. Set these parameters again with "fw ctl set" and edit appropriate parameters in $FWDIR/boot/modules/ fwkern.conf
Answer: D
Explanation:
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk62848&partition=Advanced&product=IPS
NEW QUESTION # 13
What is the buffer size set by the fw ctl zdebug command?
- A. 8GB
- B. 8MB
- C. 1 MB
- D. 1 GB
Answer: C
NEW QUESTION # 14
Where will the usermode core files be located?
- A. /var/suroot
- B. /var/log/dump/usermode
- C. SCPDIR/var/log/dump/usermode
- D. SFWDlR/var'log/dump/usermode
Answer: B
NEW QUESTION # 15
RAD is initiated when Application Control and URL Filtering blades are active on the Security Gateway What is the purpose of the following RAD configuration file SFWDIR/conf/rad_settings.C?
- A. This file contains RAD proxy settings
- B. This file contains the information on how the Security Gateway reaches the Security Managers RAD service for Application Control and URL Filtering
- C. This file contains all the host name settings for the online application detection engine
- D. This file contains the location information tor Application Control and/or URL Filtering entitlements
Answer: B
NEW QUESTION # 16
The customer is using Check Point appliances that were configured long ago by third-party administrators. Current policy includes different enabled IPS protections and Bypass Under Load function. Bypass Under Load is configured to disable IPS inspections of CPU and Memory usage is higher than 80%. The Customer reports that IPS protections are not working at all regardless of CPU and Memory usage.
What is the possible reason of such behavior?
- A. The kernel parameter ids_tolerance_stress is set to 10
- B. The kernel parameter ids_tolerance_no_stress is set to 10
- C. The kernel parameter ids_assume_stress is set to 1
- D. The kernel parameter ids_assume_stress is set to 0
Answer: A
NEW QUESTION # 17
What is the correct syntax to turn a VPN debug on and create new empty debug files?
- A. vpn debug trunkon
- B. vpndebug trunc on
- C. vpn debug truncon
- D. vpn kdebug on
Answer: A
NEW QUESTION # 18
Check Point Access Control Daemons contains several daemons for Software Blades and features. Which Daemon is used for Application & Control Filtering?
- A. cprad
- B. rad
- C. pdpd
- D. pepd
Answer: B
NEW QUESTION # 19
What is the most efficient way to view large fw monitor captures and run filters on the file?
- A. wireshark
- B. CLISH
- C. CLI
- D. snoop
Answer: A
NEW QUESTION # 20
What table does the command "fwaccel conns" pull information from?
- A. cphwd_db
- B. fwxl_conns
- C. sxl_connections
- D. SecureXLCon
Answer: B
NEW QUESTION # 21
URL Filtering is an essential part of Web Security in the Gateway. For the Security Gateway to perform a URL lookup when a client makes a URL request, where is the sync-request forwarded from if a sync-request is required''
- A. URLF Online Service
- B. RAD Kernel Space
- C. RAD User Space
- D. URLF Kernel Client
Answer: D
NEW QUESTION # 22
Vanessa is reviewing ike.elg file to troubleshoot failed site-to-site VPN connection After sending Mam Mode Packet 5 the response from the peer is PAYLOAD-MALFORMED" What is the reason for failed VPN connection?
- A. The authentication on Quick Mode is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm created in Packets 3 and 4 doesn't match with the hash on the peer gateway generated by encrypting its pre-shared key - B. The authentication on Phase 2 is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm created in Packets 1 and 2 doesn't match with the hash on the peer gateway generated by encrypting its pre-shared key - C. The authentication on Phase 1 is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm doesn't match with the hash on the peer gateway generated by encrypting its pre-shared key created in Packet 1 and Packet 2 - D. The authentication on Phase 1 is causing the problem.
Pre-shared key on local gateway encrypted by the hash algorithm created in Packet 3 and Packet 4 doesn't match with the hash on the peer gateway generated by encrypting its pre-shared key
Answer: B
NEW QUESTION # 23
What is the correct syntax to set all debug flags for Unified Policy related issues?
- A. fw ctl kdebug -m UP all
- B. fw ctl debug -m UP all
- C. fw ctl debug -m up all
- D. fw ctl debug -m fw all
Answer: B
NEW QUESTION # 24
What process is responsible for sending and receiving logs in the management server?
- A. CPM
- B. CPD
- C. FWM
- D. FWD
Answer: D
NEW QUESTION # 25
What components make up the Context Management Infrastructure?
- A. CMI Loader and Pattern Matcher
- B. CPX and FWM
- C. CPMI and FW Loader
- D. CPM and SOLR
Answer: A
NEW QUESTION # 26
What is the kernel process for Content Awareness that collects the data from the contexts received from the CMI and decides if the file is matched by a data type?
- A. cntawmod
- B. dlpda
- C. cntmgr
- D. dlpu
Answer: A
NEW QUESTION # 27
If the cpsemd process of SmartEvent has crashed or is having trouble coming up. then it usually indicates that___________.
- A. The SmartEvent core on the Solr mdexer has been deleted
- B. Postgres database ts down
- C. The logged in administrator does not have permissions to run SmartEvent
- D. Cpd daemon is unable to connect to the log server
Answer: A
NEW QUESTION # 28
During firewall kernel debug with fw ctl zdebug you received less information than expected. You noticed that a lot of messages were lost since the time the debug was started. What should you do to resolve this issue?
- A. Increase debug buffer; Use fw ctl zdebug -buf 32768
- B. Redirect debug output to file; Use fw ctl zdebug -o ./debug.elg
- C. Increase debug buffer; Use fw ctl debug -buf 32768
- D. Redirect debug output to file; Use fw ctl debug -o ./debug.elg
Answer: C
NEW QUESTION # 29
Your fwm constantly crashes and is restarted by the watchdog. You can't find any coredumps related to this process, so you need to check If coredumps are enabled at all How can you achieve that?
- A. in dish run set core-dump status
- B. in dish run show core-dump status
- C. in expert mode run show core-dump status
- D. in dish run show coredumb status
Answer: D
NEW QUESTION # 30
The management configuration stored in the Postgres database is partitioned into several relational database Domains, like - System, User, Global and Log Domains. The User Domain stores the network objects and security policies. Which of the following is stored in the Log Domain?
- A. Active and past logs received from Gateways and Servers
- B. Configuration data of Log Servers and saved queries for applications
- C. Active Logs received from Security Gateways and Management Servers
- D. Log Domain is not stored in Postgres database, it is part of Solr indexer only
Answer: D
NEW QUESTION # 31
Check Point provides tools & commands to help you to identify issues about products and applications. Which Check Point command can help you to display status and statistics information for various Check Point products and applications?
- A. cpstat
- B. fwstat
- C. CPview
- D. CPstat
Answer: A
NEW QUESTION # 32
What is the main SecureXL database for tracking acceleration status of traffic?
- A. cphwd_tmp1
- B. cphwd_dev_conn_table
- C. cphwd_db
- D. cphwd_dev_identity_table
Answer: A
NEW QUESTION # 33
What process monitors, terminates, and restarts critical Check Point processes as necessary?
- A. CPM
- B. CPWD
- C. FWD
- D. FWM
Answer: B
NEW QUESTION # 34
You are running R80.XX on an open server and you see a high CPU utilization on your 12 CPU cores You now want to enable Hyperthreading to get more cores to gain some performance. What is the correct way to achieve this?
- A. just turn on HAT in the bios of the server and after it has booted enable it in cpconfig
- B. Hyperthreading is not supported on open servers, on on Check Point Appliances
- C. in dish run set HAT on
- D. just turn on HAT in the bios of the server and boot it
Answer: C
NEW QUESTION # 35
......
Valid 156-585 Dumps for Helping Passing CheckPoint Exam: https://www.free4dump.com/156-585-braindumps-torrent.html
Practice Exam 156-585 Realistic Dumps Verified Questions: https://drive.google.com/open?id=1SoVYAHVuyuswoyOQj5hJ3t8Yo9eUABu9