Updated Mar 23, 2023 Certification Exam 156-585 Dumps - Practice Test Questions
Updated Verified 156-585 dumps Q&As - Pass Guarantee or Full Refund
CheckPoint 156-585 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
What is the CheckPoint 156-585 Exam?
The CheckPoint 156-585 Certification Exam is a commonly administered exam that will test your knowledge and abilities in the field of information security. A certification from the International Information System Security Certification Consortium (ISC2) is a globally recognized certification. This program has been proposed, developed, and reviewed by leading experts and verified topic specialists in the information security industry.
NEW QUESTION 69
Select the technology that does the following actions
- provides reassembly via streaming for TCP
- handles packet reordering and congestion
- handles payload overlap
- provides consistent stream of data to protocol parsers
- A. Passive Streaming Library
- B. Context Management
- C. fwtcpstream
- D. Pre-Protocol Parser
Answer: A
NEW QUESTION 70
If IPS protections that prevent SecureXL from accelerating traffic, such as Network Quota, Fingerprint Scrambling. TTL Masking etc, have to be used, what is a recommended practice to enhance the performance of the gateway?
- A. Disable SecureXL and use CoreXL
- B. Disable all such protections
- C. Upgrade the hardware to include more Cores and Memory
- D. Use the IPS exception mechanism
Answer: A
NEW QUESTION 71
How many captures does the command "fw monitor -p all" take?
- A. All 15 of the inbound and outbound modules
- B. All 4 points of the fw VM modules
- C. The -p option takes the same number of captures, but gathers all of the data packet
- D. 1 from every inbound and outbound module of the chain
Answer: A
NEW QUESTION 72
The two procedures available for debugging in the firewall kernel are
i fw ctl zdebug
ii fw ctl debug/kdebug
Choose the correct statement explaining the differences in the two
- A. (i) is used on a Security Gateway, whereas (11) is used on a Security Management Server
- B. (i) Is used for general debugging, has a small buffer and is a quick way to set kernel debug flags to get an output via command line whereas (11) is useful when there is a need for detailed debugging and requires additional steps to set the buffer and get an output via command line
- C. (i) is used to debug only issues related to dropping of traffic, however (n) can be used for any firewall issue including NATing, clustering etc.
- D. (i) is used to debug the access control policy only, however (n) can be used to debug a unified policy
Answer: C
NEW QUESTION 73
You need to runa kernel debug over a longer period of time as the problem occurs only once or twice a week.
Therefore you need to add a timestamp to the kernel debug and write the output to a file What is the correct syntax for this?
- A. fw ctl kdebug -T > filename debug
- B. fw ctl kdebug -T -f > filename debug
- C. fw ctl kdebug -T -f -o filename debug
- D. fw ctl debug -T -f > filename debug
Answer: D
NEW QUESTION 74
The Check Point Firewall Kernel is the core component of the Gala operating system and an integral part of traffic inspection process. There are two procedures available for debugging the firewall kernel. Which procedure/command is used for detailed troubleshooting and needs more resources?
- A. fw ctl zdebug
- B. fw debug/kdebug ctl
- C. fw ctl debug/kdebug
- D. fw debug/kdebug
Answer: A
NEW QUESTION 75
What are the main components of Check Point's Security Management architecture?
- A. Management Server. Log Server. LDAP Server, Web Server
- B. Management server, management database, log server, automation server
- C. Management server Log server, Gateway server. Security server
- D. Management server, Security Gateway. Multi-Domain Server, SmartEvent Server
Answer: B
NEW QUESTION 76
What is the most efficient way to view large fw monitor captures and run filters on the file?
- A. CLISH
- B. CLI
- C. wireshark
- D. snoop
Answer: C
NEW QUESTION 77
What are the main components of Check Point's Security Management architecture?
- A. Management Server. Log Server. LDAP Server, Web Server
- B. Management server, Security Gateway. Multi-Domain Server, SmartEvent Server
- C. Management server Log server, Gateway server. Security server
- D. Management server management database, log server, automation server
Answer: B
NEW QUESTION 78
What command is usedtofind out which port Multi-Portal has assigned to the Mobile Access Portal?
- A. netstat -nap | grep mobile
- B. netstat getdata sslvpn
- C. mpclient getdata mobi
- D. mpclient getdata sslvpn
Answer: B
NEW QUESTION 79
Troubleshooting issues with Mobile Access requires the following:
- A. Debug logs of FWD captured with the command - 'fw debug fwd on
TDERROR_MOBILE_ACCESS=5' - B. Standard VPN debugs and packet captures on Security Gateway, debugs of "cvpnd' process on Security Management
- C. Standard VPN debugs, packet captures, and debugs of cvpnd' process on Security Gateway
- D. 'ma_vpnd' process on Secunty Gateway
Answer: C
NEW QUESTION 80
You are running R80.XX on an open server and you see a high CPU utilization on your 12 CPU cores You now want to enable Hyperthreading to get more cores to gain some performance. What is the correct way to achieve this?
- A. Hyperthreading is not supported on open servers, on on Check Point Appliances
- B. just turn on HAT in the bios of the server and after it has booted enable it in cpconfig
- C. just turn on HAT in the bios of the server and boot it
- D. in dish run set HAT on
Answer: A
NEW QUESTION 81
What are the four ways to insert an FW Monitor into the firewallkernel chain?
- A. Absolute position using location, relative position using alias, general position, all positions
- B. Absolute position using location, absolute position using alias, relative position, all positions
- C. Relative position using location, relativepositionusing alias, absolute position, all positions
- D. Relative position using geolocation relative position using inertial navigation, absolute position all positions
Answer: D
NEW QUESTION 82
VPN issues may result from misconfiguration, communication failure, or incompatible default configurations between peers Which basic command syntax needs to be used fortroubleshootingSite-to-Site VPN Issues?
- A. fw debug truncon
- B. vpn truncon debug
- C. cp debug truncon
- D. vpn debug truncon
Answer: B
NEW QUESTION 83
You are running R80.XX on an open server and you see a high CPU utilization on your 12 CPU cores You now want to enable Hyperthreading to get more cores to gain some performance. What is the correct way to achieve this?
- A. in dish run set HAT on
- B. just turn on HAT in the bios of the server and after it has booted enable it in cpconfig
- C. just turn on HAT in the bios of the server and boot it
- D. Hyperthreading is not supported on open servers, on on Check Point Appliances
Answer: A
NEW QUESTION 84
What is the function of the Core Dump Manager utility?
- A. To send crash information to an external analyzer
- B. To determine which process is slowing down the system
- C. To limit the number of core dump files per process as well as the total amount of disk space used by core files
- D. To generate a new core dump for analysis
Answer: C
NEW QUESTION 85
Which of the following inputs is suitable for debugging HTTPS inspection issues?
- A. fw diag debug tls enable
- B. fw ctl debug -m fw + conn drop cptls
- C. fw debug tls on TDERROR_ALL_ALL=5
- D. vpn debug cptls on
Answer: B
NEW QUESTION 86
What acceleration mode utlizes multi-core processing to assist with traffic processing?
- A. HyperThreading
- B. SecureXL
- C. Traffic Warping
- D. CoreXL
Answer: A
NEW QUESTION 87
Your users have some issues connecting Mobile Access VPN to the gateway. How can you debug the tunnel establishment?
- A. in the file $CVPNDIR/conf/httpd.conf change the line loglevel .. To LogLevel debug and run cvpnrestart
- B. run fw ctl zdebug -m sslvpn all
- C. run vpn debug truncon
- D. in the file $VPNDIR/conf/httpd.conf the line Loglevel .. To LogLevel debug and run vpn restart
Answer: A
NEW QUESTION 88
......
Exam Engine for 156-585 Exam Free Demo & 365 Day Updates: https://www.free4dump.com/156-585-braindumps-torrent.html
156-585 PDF Questions and Testing Engine With 116 Questions: https://drive.google.com/open?id=1SoVYAHVuyuswoyOQj5hJ3t8Yo9eUABu9